クリーンルーム洗剤
- Neutral surfactant chemistry supports routine surface compatibility
- Low-foam action suits controlled wiping and mopping techniques
- Free-rinsing formulation helps limit visible detergent deposits
商品紹介
Cleanroom detergent is a low-surfactant aqueous cleaner intended for floors, walls, ceilings, benches, doors, and compatible equipment exteriors in controlled environments. The near-neutral formulation provides general soil removal without the aggressive alkalinity of heavy-duty process cleaners. Ready-to-use liquid reduces dilution handling for local wiping, while capped bulk and measured concentrate formats can support larger-area mopping. The cleaning concentration, contact time, mechanical action, rinse step, and material compatibility should be defined by the facility's approved cleaning method.
主要な特徴
Low-foaming action for wipes, flat mops, and bucket systems
Low surfactant loading to simplify residue removal
Effective wetting of smooth nonporous cleanroom surfaces
Clear, colorless formulation without unnecessary dye or perfume
Ready-to-use and concentrated packaging configurations
Compatible with purified-water rinsing where required
Smooth HDPE containers suitable for controlled material transfer
お客様の製品に関する懸念事項
Disinfection alone may not remove dust-binding films, oils, adhesive traces, or accumulated chemistry. Excess foam obscures surface coverage and slows rinsing, while overdosing a detergent can leave streaks or tacky deposits that attract new particles.
典型的な用途
技術的なパラメータ
Surface-active ingredients lower the wetting tension of the cleaning solution and loosen the bond between soil and a nonporous surface. A cleanroom wipe or mop then provides the mechanical action needed to capture and remove the released contamination. Where the site's residue limit requires it, a purified-water rinse completes the process.
| コア材料 | Low-concentration surface-active detergent blended with purified or deionized water |
|---|---|
| パネルの厚さ | 1.2–2.0 mm nominal HDPE container wall thickness |
| 有効幅 | 170–220 mm typical width for a 5 L capped container |
| 最大長さ | 300–380 mm overall container height |
| 鋼鉄の厚さを直面する | 0 mm; supplied in polymer packaging without steel facing |
| コア密度 | 995–1020 kg/m³ typical density for the aqueous solution |
| 熱伝導率 | Approximately 0.55–0.65 W/(m·K) at 20 °C for the water-based formulation |
| 表面仕上げ | Clear, colorless low-foaming liquid in a smooth wipeable HDPE container |
| ジョイントタイプ | Tamper-evident threaded screw-cap closure with an integral molded carrying handle |
| カスタマイズ | 意図したアプリケーションと動作環境に基づいて利用できます。 |
利用可能なオプション
Planning a Cleanroom Detergent specification?
寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

日本語
ドイツ人。
アラビア語:アラビア語
フランス語で
インドネシア語
日本語で。流れ
韓国語
マレー語
ポルトガル語
ロシア語
スペイン語
タイ語
トルコ語
ベトナム語