클린룸 세제
- Neutral surfactant chemistry supports routine surface compatibility
- Low-foam action suits controlled wiping and mopping techniques
- Free-rinsing formulation helps limit visible detergent deposits
상품 소개
Cleanroom detergent is a low-surfactant aqueous cleaner intended for floors, walls, ceilings, benches, doors, and compatible equipment exteriors in controlled environments. The near-neutral formulation provides general soil removal without the aggressive alkalinity of heavy-duty process cleaners. Ready-to-use liquid reduces dilution handling for local wiping, while capped bulk and measured concentrate formats can support larger-area mopping. The cleaning concentration, contact time, mechanical action, rinse step, and material compatibility should be defined by the facility's approved cleaning method.
주요 기능
Low-foaming action for wipes, flat mops, and bucket systems
Low surfactant loading to simplify residue removal
Effective wetting of smooth nonporous cleanroom surfaces
Clear, colorless formulation without unnecessary dye or perfume
Ready-to-use and concentrated packaging configurations
Compatible with purified-water rinsing where required
Smooth HDPE containers suitable for controlled material transfer
고객 제품 관심사
Disinfection alone may not remove dust-binding films, oils, adhesive traces, or accumulated chemistry. Excess foam obscures surface coverage and slows rinsing, while overdosing a detergent can leave streaks or tacky deposits that attract new particles.
일반적인 응용 프로그램
기술 매개변수
Surface-active ingredients lower the wetting tension of the cleaning solution and loosen the bond between soil and a nonporous surface. A cleanroom wipe or mop then provides the mechanical action needed to capture and remove the released contamination. Where the site's residue limit requires it, a purified-water rinse completes the process.
| 핵심 재료 | Low-concentration surface-active detergent blended with purified or deionized water |
|---|---|
| 패널 두께 | 1.2–2.0 mm nominal HDPE container wall thickness |
| 유효 폭 | 170–220 mm typical width for a 5 L capped container |
| 최대 길이 | 300–380 mm overall container height |
| 강철 면면 두께 | 0 mm; supplied in polymer packaging without steel facing |
| 코어 밀도 | 995–1020 kg/m³ typical density for the aqueous solution |
| 열전도도 (Thermal Conductivity) | Approximately 0.55–0.65 W/(m·K) at 20 °C for the water-based formulation |
| 표면 마무리 | Clear, colorless low-foaming liquid in a smooth wipeable HDPE container |
| 접합 유형 | Tamper-evident threaded screw-cap closure with an integral molded carrying handle |
| 사용자 정의 | 의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다. |
사용 가능한 옵션
Planning a Cleanroom Detergent specification?
치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

영어
독일어
아랍어
프랑스어
인도네시아어
일본어
한국어현재 Current
말레이어
포르투갈어
러시아어
스페인어
태국어
터키어
베트남어