Microbiological Environmental Monitoring Products

ATP Bioluminescence Meter

A handheld luminometer that rapidly measures ATP test-device light output for objective verification of surface-cleaning effectiveness.

Rapid RLU Measurement
Large Touchscreen Workflow
Removable Read Chamber
Wireless Data Transfer

Request a Quote Browse Products

Product Introduction

The ATP Bioluminescence Meter detects light produced when an activated ATP test reacts with biological residue. A shielded read chamber and sensitive photodiode convert emitted light into relative light units, while guided touchscreen workflows associate results with locations, users and limits. Rechargeable portable operation and digital synchronization support immediate hygiene decisions at the sampling point.

Key Features

Sensitive photodiode detection measures low-level bioluminescent signals in seconds.

A guided touchscreen reduces entry errors across locations and test plans.

The removable read chamber allows accessible cleaning after accidental test-device leakage.

Onboard storage and wireless or USB connectivity simplify trend reporting.

Customer Product Concerns

Rapid hygiene verification must deliver a consistent quantitative result while preventing chamber contamination and transcription errors.

Visual inspection cannot detect invisible organic residue.ATP bioluminescence converts residual biological material into an objective RLU result.

Manual recording causes location and result transcription mistakes.Programmed locations, users and test plans bind metadata directly to each reading.

A leaking test device contaminates the optical chamber.A removable cleanable chamber insert isolates and protects the detector area.

Delayed reporting slows corrective cleaning decisions.Rapid measurement and wireless synchronization make results available at the point of use.

Typical Applications

Cleanroom surface hygiene verificationEquipment cleaning checksSanitation program trendingRapid process-area screening

Technical Parameters

Typical construction values for a handheld ATP bioluminescence meter are listed below.

Core Material	Impact-resistant polymer housing with photodiode optical read chamber
Panel Thickness	2-4 mm nominal housing wall
Effective Width	80-90 mm handheld instrument width
Maximum Length	Up to 270 mm overall instrument length
Steel Facing Thickness	0.8-1.2 mm equivalent internal shield thickness
Core Density	1050-1200 kg/m³ for engineered polymer housing
Thermal Conductivity	0.18-0.30 W/(m·K) for housing polymer
Surface Finish	Textured blue-gray grip with shatter-resistant color touchscreen
Joint Type	Hinged or removable test-chamber cover with replaceable optical insert
Customization	Available based on the intended application and operating environment.

Available Options

Surface or water ATP testsCharging dockWi-Fi and USB data transferProtective carrying case

Planning a ATP Bioluminescence Meter specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team