Complete handheld ATP bioluminescence meter with color screen and sampling swab

Продукты для микробиологического экологического мониторинга

АТФ биолюминесцентный счетчик

A handheld luminometer that rapidly measures ATP test-device light output for objective verification of surface-cleaning effectiveness.

Rapid RLU Measurement
Large Touchscreen Workflow
Removable Read Chamber
Wireless Data Transfer

Запрос котировки Просмотреть продукты

Введение продукции

The ATP Bioluminescence Meter detects light produced when an activated ATP test reacts with biological residue. A shielded read chamber and sensitive photodiode convert emitted light into relative light units, while guided touchscreen workflows associate results with locations, users and limits. Rechargeable portable operation and digital synchronization support immediate hygiene decisions at the sampling point.

Основные характеристики

Sensitive photodiode detection measures low-level bioluminescent signals in seconds.

A guided touchscreen reduces entry errors across locations and test plans.

The removable read chamber allows accessible cleaning after accidental test-device leakage.

Onboard storage and wireless or USB connectivity simplify trend reporting.

Обеспокоенность клиентов продуктами

Rapid hygiene verification must deliver a consistent quantitative result while preventing chamber contamination and transcription errors.

Visual inspection cannot detect invisible organic residue.ATP bioluminescence converts residual biological material into an objective RLU result.

Manual recording causes location and result transcription mistakes.Programmed locations, users and test plans bind metadata directly to each reading.

A leaking test device contaminates the optical chamber.A removable cleanable chamber insert isolates and protects the detector area.

Delayed reporting slows corrective cleaning decisions.Rapid measurement and wireless synchronization make results available at the point of use.

Типичные приложения

Cleanroom surface hygiene verificationEquipment cleaning checksSanitation program trendingRapid process-area screening

Технические параметры

Typical construction values for a handheld ATP bioluminescence meter are listed below.

Основной материал	Impact-resistant polymer housing with photodiode optical read chamber
Толщина панели	2-4 mm nominal housing wall
эффективная ширина	80-90 mm handheld instrument width
Максимальная длина	Up to 270 mm overall instrument length
Толщина линий стали	0.8-1.2 mm equivalent internal shield thickness
Плотность ядра	1050-1200 kg/m³ for engineered polymer housing
Теплопроводимость	0.18-0.30 W/(m·K) for housing polymer
Поверхностная отделка	Textured blue-gray grip with shatter-resistant color touchscreen
Объединенный тип	Hinged or removable test-chamber cover with replaceable optical insert
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Surface or water ATP testsCharging dockWi-Fi and USB data transferProtective carrying case

Planning a ATP Bioluminescence Meter specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой