Complete handheld ATP bioluminescence meter with color screen and sampling swab

미생물 환경 모니터링 제품

ATP 생체 발광 미터

A handheld luminometer that rapidly measures ATP test-device light output for objective verification of surface-cleaning effectiveness.

Rapid RLU Measurement
Large Touchscreen Workflow
Removable Read Chamber
Wireless Data Transfer

견적 요청 제품 찾아보기

상품 소개

The ATP Bioluminescence Meter detects light produced when an activated ATP test reacts with biological residue. A shielded read chamber and sensitive photodiode convert emitted light into relative light units, while guided touchscreen workflows associate results with locations, users and limits. Rechargeable portable operation and digital synchronization support immediate hygiene decisions at the sampling point.

주요 기능

Sensitive photodiode detection measures low-level bioluminescent signals in seconds.

A guided touchscreen reduces entry errors across locations and test plans.

The removable read chamber allows accessible cleaning after accidental test-device leakage.

Onboard storage and wireless or USB connectivity simplify trend reporting.

고객 제품 관심사

Rapid hygiene verification must deliver a consistent quantitative result while preventing chamber contamination and transcription errors.

Visual inspection cannot detect invisible organic residue.ATP bioluminescence converts residual biological material into an objective RLU result.

Manual recording causes location and result transcription mistakes.Programmed locations, users and test plans bind metadata directly to each reading.

A leaking test device contaminates the optical chamber.A removable cleanable chamber insert isolates and protects the detector area.

Delayed reporting slows corrective cleaning decisions.Rapid measurement and wireless synchronization make results available at the point of use.

일반적인 응용 프로그램

Cleanroom surface hygiene verificationEquipment cleaning checksSanitation program trendingRapid process-area screening

기술 매개변수

Typical construction values for a handheld ATP bioluminescence meter are listed below.

핵심 재료	Impact-resistant polymer housing with photodiode optical read chamber
패널 두께	2-4 mm nominal housing wall
유효 폭	80-90 mm handheld instrument width
최대 길이	Up to 270 mm overall instrument length
강철 면면 두께	0.8-1.2 mm equivalent internal shield thickness
코어 밀도	1050-1200 kg/m³ for engineered polymer housing
열전도도 (Thermal Conductivity)	0.18-0.30 W/(m·K) for housing polymer
표면 마무리	Textured blue-gray grip with shatter-resistant color touchscreen
접합 유형	Hinged or removable test-chamber cover with replaceable optical insert
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Surface or water ATP testsCharging dockWi-Fi and USB data transferProtective carrying case

Planning a ATP Bioluminescence Meter specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.