Complete handheld ATP bioluminescence meter with color screen and sampling swab

微生物環境モニタリング製品

ATP 生物発光計

A handheld luminometer that rapidly measures ATP test-device light output for objective verification of surface-cleaning effectiveness.

Rapid RLU Measurement
Large Touchscreen Workflow
Removable Read Chamber
Wireless Data Transfer

見積もりリクエスト製品案内

商品紹介

The ATP Bioluminescence Meter detects light produced when an activated ATP test reacts with biological residue. A shielded read chamber and sensitive photodiode convert emitted light into relative light units, while guided touchscreen workflows associate results with locations, users and limits. Rechargeable portable operation and digital synchronization support immediate hygiene decisions at the sampling point.

主要な特徴

Sensitive photodiode detection measures low-level bioluminescent signals in seconds.

A guided touchscreen reduces entry errors across locations and test plans.

The removable read chamber allows accessible cleaning after accidental test-device leakage.

Onboard storage and wireless or USB connectivity simplify trend reporting.

お客様の製品に関する懸念事項

Rapid hygiene verification must deliver a consistent quantitative result while preventing chamber contamination and transcription errors.

Visual inspection cannot detect invisible organic residue.ATP bioluminescence converts residual biological material into an objective RLU result.

Manual recording causes location and result transcription mistakes.Programmed locations, users and test plans bind metadata directly to each reading.

A leaking test device contaminates the optical chamber.A removable cleanable chamber insert isolates and protects the detector area.

Delayed reporting slows corrective cleaning decisions.Rapid measurement and wireless synchronization make results available at the point of use.

典型的な用途

Cleanroom surface hygiene verificationEquipment cleaning checksSanitation program trendingRapid process-area screening

技術的なパラメータ

Typical construction values for a handheld ATP bioluminescence meter are listed below.

コア材料	Impact-resistant polymer housing with photodiode optical read chamber
パネルの厚さ	2-4 mm nominal housing wall
有効幅	80-90 mm handheld instrument width
最大長さ	Up to 270 mm overall instrument length
鋼鉄の厚さを直面する	0.8-1.2 mm equivalent internal shield thickness
コア密度	1050-1200 kg/m³ for engineered polymer housing
熱伝導率	0.18-0.30 W/(m·K) for housing polymer
表面仕上げ	Textured blue-gray grip with shatter-resistant color touchscreen
ジョイントタイプ	Hinged or removable test-chamber cover with replaceable optical insert
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Surface or water ATP testsCharging dockWi-Fi and USB data transferProtective carrying case

Planning a ATP Bioluminescence Meter specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する