EnglishCurrent
德语
阿拉伯语
法语
印尼语
日语
韩语
马来语
葡萄牙语
俄语
西班牙语
泰语
土耳其语
越南语
Laminar Flow and Containment Equipment
Animal Transfer Station
A dual-access ventilated workstation that allows coordinated animal or cage transfer from opposite sides of one protected work zone.
- Dual-Sided Operator Access
- Central Protected Work Zone
- Perimeter Containment Capture
- Long Transfer Surface
Product Introduction
The animal transfer station differs from a single-sided cage changer by allowing operators or cage positions on both sides of the work surface. A central filtered downflow field protects the transfer zone, while perimeter and lower extraction grilles collect dander and airborne bedding. The long open ends accommodate carriers or cages entering from either direction. A rigid stainless frame resists movement during coordinated transfer steps.
Key Features
A central diffuser supplies clean air over the shared handling area.
Perimeter capture grilles collect particles from both operator sides.
Open ends accommodate long carriers and varied cage formats.
A reinforced fixed or mobile base maintains alignment during two-person work.
Customer Product Concerns
Two-sided handling improves workflow but creates additional open boundaries that require balanced capture around the complete work surface.
Cages must be carried around a single-sided workstation.Opposed access creates a direct transfer path across the central work zone.
One capture grille favors only one operator side.Balanced perimeter grilles collect airborne material from both sides.
Long carriers do not fit beneath fixed end panels.Open end geometry preserves clearance along the transfer axis.
The table shifts during coordinated animal movement.A reinforced chassis with brakes or fixed leveling feet stabilizes the station.
Typical Applications
Animal transfer between cagesDual-operator vivarium proceduresCarrier-to-cage movementShared clean handling in research facilities
Technical Parameters
Typical configurable construction ranges for a dual-access animal transfer station are listed below.
| Core Material | SUS304 central work surface and perimeter grilles with powder-coated steel fan base and acoustic mineral-wool lining |
|---|---|
| Panel Thickness | 35-60 mm double-skin airflow sections |
| Effective Width | 1500-2400 mm usable transfer width |
| Maximum Length | Up to 3000 mm overall station length |
| Steel Facing Thickness | 1.2-1.5 mm SUS304 work surfaces; 1.0-1.2 mm outer steel |
| Core Density | 80-120 kg/m³ mineral-wool acoustic lining |
| Thermal Conductivity | 0.035-0.045 W/(m·K) for the acoustic lining |
| Surface Finish | Brushed SUS304 central work zone with cleanable coated service base |
| Joint Type | Welded central tray with removable opposed capture grilles and gasketed filter access |
| Customization | Available based on the intended application and operating environment. |
Available Options
Fixed or mobile chassisHeight-adjustable work surfaceSingle- or dual-filter exhaustCarrier guide rails
Planning a Animal Transfer Station specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.
