Dual-access animal transfer station with open opposed work sides

Оборудование для ламинарного потока и ограничения

Трансферная станция для животных

A dual-access ventilated workstation that allows coordinated animal or cage transfer from opposite sides of one protected work zone.

Dual-Sided Operator Access
Central Protected Work Zone
Perimeter Containment Capture
Long Transfer Surface

Запрос котировки Просмотреть продукты

Введение продукции

The animal transfer station differs from a single-sided cage changer by allowing operators or cage positions on both sides of the work surface. A central filtered downflow field protects the transfer zone, while perimeter and lower extraction grilles collect dander and airborne bedding. The long open ends accommodate carriers or cages entering from either direction. A rigid stainless frame resists movement during coordinated transfer steps.

Основные характеристики

Opposed access supports coordinated transfer without passing cages around the station.

A central diffuser supplies clean air over the shared handling area.

Perimeter capture grilles collect particles from both operator sides.

Open ends accommodate long carriers and varied cage formats.

A reinforced fixed or mobile base maintains alignment during two-person work.

Обеспокоенность клиентов продуктами

Two-sided handling improves workflow but creates additional open boundaries that require balanced capture around the complete work surface.

Cages must be carried around a single-sided workstation.Opposed access creates a direct transfer path across the central work zone.

One capture grille favors only one operator side.Balanced perimeter grilles collect airborne material from both sides.

Long carriers do not fit beneath fixed end panels.Open end geometry preserves clearance along the transfer axis.

The table shifts during coordinated animal movement.A reinforced chassis with brakes or fixed leveling feet stabilizes the station.

Типичные приложения

Animal transfer between cagesDual-operator vivarium proceduresCarrier-to-cage movementShared clean handling in research facilities

Технические параметры

Typical configurable construction ranges for a dual-access animal transfer station are listed below.

Основной материал	SUS304 central work surface and perimeter grilles with powder-coated steel fan base and acoustic mineral-wool lining
Толщина панели	35-60 mm double-skin airflow sections
эффективная ширина	1500-2400 mm usable transfer width
Максимальная длина	Up to 3000 mm overall station length
Толщина линий стали	1.2-1.5 mm SUS304 work surfaces; 1.0-1.2 mm outer steel
Плотность ядра	80-120 kg/m³ mineral-wool acoustic lining
Теплопроводимость	0.035-0.045 W/(m·K) for the acoustic lining
Поверхностная отделка	Brushed SUS304 central work zone with cleanable coated service base
Объединенный тип	Welded central tray with removable opposed capture grilles and gasketed filter access
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Fixed or mobile chassisHeight-adjustable work surfaceSingle- or dual-filter exhaustCarrier guide rails

Planning a Animal Transfer Station specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой