Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Fluxo laminar e equipamentos de contenção
Z Estação de transferência de animais
A dual-access ventilated workstation that allows coordinated animal or cage transfer from opposite sides of one protected work zone.
- Dual-Sided Operator Access
- Central Protected Work Zone
- Perimeter Containment Capture
- Long Transfer Surface
Introdução do produto
The animal transfer station differs from a single-sided cage changer by allowing operators or cage positions on both sides of the work surface. A central filtered downflow field protects the transfer zone, while perimeter and lower extraction grilles collect dander and airborne bedding. The long open ends accommodate carriers or cages entering from either direction. A rigid stainless frame resists movement during coordinated transfer steps.
Características-chave
A central diffuser supplies clean air over the shared handling area.
Perimeter capture grilles collect particles from both operator sides.
Open ends accommodate long carriers and varied cage formats.
A reinforced fixed or mobile base maintains alignment during two-person work.
Preocupações do produto do cliente
Two-sided handling improves workflow but creates additional open boundaries that require balanced capture around the complete work surface.
Cages must be carried around a single-sided workstation.Opposed access creates a direct transfer path across the central work zone.
One capture grille favors only one operator side.Balanced perimeter grilles collect airborne material from both sides.
Long carriers do not fit beneath fixed end panels.Open end geometry preserves clearance along the transfer axis.
The table shifts during coordinated animal movement.A reinforced chassis with brakes or fixed leveling feet stabilizes the station.
Aplicações típicas
Animal transfer between cagesDual-operator vivarium proceduresCarrier-to-cage movementShared clean handling in research facilities
Parâmetros técnicos
Typical configurable construction ranges for a dual-access animal transfer station are listed below.
| Material principal | SUS304 central work surface and perimeter grilles with powder-coated steel fan base and acoustic mineral-wool lining |
|---|---|
| Painel de espessura | 35-60 mm double-skin airflow sections |
| Largura efetiva | 1500-2400 mm usable transfer width |
| Comprimento máximo | Up to 3000 mm overall station length |
| Aço enfrentando espessura | 1.2-1.5 mm SUS304 work surfaces; 1.0-1.2 mm outer steel |
| Densidade Core | 80-120 kg/m³ mineral-wool acoustic lining |
| Condutividade térmica | 0.035-0.045 W/(m·K) for the acoustic lining |
| Superfície acabado | Brushed SUS304 central work zone with cleanable coated service base |
| Tipo conjunto | Welded central tray with removable opposed capture grilles and gasketed filter access |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Fixed or mobile chassisHeight-adjustable work surfaceSingle- or dual-filter exhaustCarrier guide rails
Planning a Animal Transfer Station specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
