Dual-access animal transfer station with open opposed work sides

Aliran Laminar dan Peralatan Penahanan

Stasiun Transfer Hewan

A dual-access ventilated workstation that allows coordinated animal or cage transfer from opposite sides of one protected work zone.

Dual-Sided Operator Access
Central Protected Work Zone
Perimeter Containment Capture
Long Transfer Surface

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The animal transfer station differs from a single-sided cage changer by allowing operators or cage positions on both sides of the work surface. A central filtered downflow field protects the transfer zone, while perimeter and lower extraction grilles collect dander and airborne bedding. The long open ends accommodate carriers or cages entering from either direction. A rigid stainless frame resists movement during coordinated transfer steps.

Fitur utama:

Opposed access supports coordinated transfer without passing cages around the station.

A central diffuser supplies clean air over the shared handling area.

Perimeter capture grilles collect particles from both operator sides.

Open ends accommodate long carriers and varied cage formats.

A reinforced fixed or mobile base maintains alignment during two-person work.

Kekhawatiran produk pelanggan

Two-sided handling improves workflow but creates additional open boundaries that require balanced capture around the complete work surface.

Cages must be carried around a single-sided workstation.Opposed access creates a direct transfer path across the central work zone.

One capture grille favors only one operator side.Balanced perimeter grilles collect airborne material from both sides.

Long carriers do not fit beneath fixed end panels.Open end geometry preserves clearance along the transfer axis.

The table shifts during coordinated animal movement.A reinforced chassis with brakes or fixed leveling feet stabilizes the station.

Aplikasi yang Tipis

Animal transfer between cagesDual-operator vivarium proceduresCarrier-to-cage movementShared clean handling in research facilities

Parameter teknis

Typical configurable construction ranges for a dual-access animal transfer station are listed below.

Bahan inti	SUS304 central work surface and perimeter grilles with powder-coated steel fan base and acoustic mineral-wool lining
Ketebalan Panel (Panel Thickness)	35-60 mm double-skin airflow sections
Efektif lebar	1500-2400 mm usable transfer width
Panjang maksimum	Up to 3000 mm overall station length
Baja menghadap ketebalan	1.2-1.5 mm SUS304 work surfaces; 1.0-1.2 mm outer steel
Kepadatan inti (core density)	80 - 120 kg / m3 lapisan akustik mineral-wol
Konduktivitas Termal (Thermal Conductivity)	0,035 - 0,045 W / (m · K) untuk lapisan akustik
Permukaan selesai	Brushed SUS304 central work zone with cleanable coated service base
Jenis Bersama	Welded central tray with removable opposed capture grilles and gasketed filter access
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Fixed or mobile chassisHeight-adjustable work surfaceSingle- or dual-filter exhaustCarrier guide rails

Planning a Animal Transfer Station specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami