English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة التحكم في الغرف النظيفة والمراقبة البيئية
درجة الحرارة والرطوبة عرض
A dual-parameter wall display that shows cleanroom temperature and relative humidity in large, independently alarmed readings.
- Dual Large Readings
- Independent T and RH Limits
- Local or Remote Sensors
- Dew-Point Display Option
مقدمة المنتج
The temperature and humidity display presents both room variables on a high-contrast screen without hiding one value behind a menu. It can use an integrated ventilated sensor or receive measurements from a remote transmitter located at a more representative point. Independent temperature and humidity limits drive color changes, buzzer or relay output. Optional dew-point calculation helps operators interpret moisture condition when room temperature changes, and network output sends the live values to centralized monitoring.
الخصائص الرئيسية
Independent alarm bands prevent one variable from masking the other.
Remote sensor input separates the display location from the measurement location when needed.
Optional dew-point calculation adds moisture context without installing another sensor.
مخاوف المنتج للعملاء
The most visible display location is not always the best measurement point, especially near doors, lights or warm wall cavities.
A warm display enclosure biases the integrated temperature sensor.Remote-probe input places the sensing element away from display heat and wall effects.
Humidity appears normal only because room temperature has changed.Temperature, RH and optional dew point are shown together for clearer interpretation.
One alarm color does not show which variable is abnormal.Separate temperature and humidity fields change status independently.
Small values cannot be read from the cleanroom corridor.Large high-contrast digits prioritize the two live measurements.
تطبيقات نموذجية
Cleanroom entrance displaysControlled storage roomsLaboratory environmental indicationProduction-area comfort monitoring
المعلمات الفنية
Typical materials and dimensions for a cleanroom temperature and humidity display are listed below.
| المواد الأساسية | Industrial LCD with platinum temperature and capacitive RH sensing in 304 stainless steel bezel housing |
|---|---|
| سمك اللوحة | 35-75 mm display depth |
| العرض الفعال | 160-300 mm front width |
| الحد الأقصى الطول | Up to 380 mm display height |
| الصلب يواجه سمك | 0-1.2 mm; optional 304 stainless front bezel |
| الكثافة الأساسية | 7900-8030 kg/m³ for stainless bezel components |
| الموصلية الحرارية | 14-17 W/(m·K) for 304 stainless steel bezel |
| إنهاء السطح | Brushed stainless bezel with black display and blue-green numeric graphics |
| نوع المشترك | Flush or surface wall mount with integrated vents or remote-probe connector |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Integrated or remote sensorWhite powder-coated or brushed stainless bezelDew-point calculation and relay outputsModbus or BACnet communication
Planning a Temperature and Humidity Display specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
