Complete cleanroom temperature and humidity display with black screen and blue-green dual values

Kontrol Cleanroom dan Sistem Pemantauan Lingkungan

Temperature dan Humidity Display

A dual-parameter wall display that shows cleanroom temperature and relative humidity in large, independently alarmed readings.

Dual Large Readings
Independent T and RH Limits
Local or Remote Sensors
Dew-Point Display Option

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The temperature and humidity display presents both room variables on a high-contrast screen without hiding one value behind a menu. It can use an integrated ventilated sensor or receive measurements from a remote transmitter located at a more representative point. Independent temperature and humidity limits drive color changes, buzzer or relay output. Optional dew-point calculation helps operators interpret moisture condition when room temperature changes, and network output sends the live values to centralized monitoring.

Fitur utama:

Two persistent numeric fields keep temperature and relative humidity visible together.

Independent alarm bands prevent one variable from masking the other.

Remote sensor input separates the display location from the measurement location when needed.

Optional dew-point calculation adds moisture context without installing another sensor.

Kekhawatiran produk pelanggan

The most visible display location is not always the best measurement point, especially near doors, lights or warm wall cavities.

A warm display enclosure biases the integrated temperature sensor.Remote-probe input places the sensing element away from display heat and wall effects.

Humidity appears normal only because room temperature has changed.Temperature, RH and optional dew point are shown together for clearer interpretation.

One alarm color does not show which variable is abnormal.Separate temperature and humidity fields change status independently.

Small values cannot be read from the cleanroom corridor.Large high-contrast digits prioritize the two live measurements.

Aplikasi yang Tipis

Cleanroom entrance displaysControlled storage roomsLaboratory environmental indicationProduction-area comfort monitoring

Parameter teknis

Typical materials and dimensions for a cleanroom temperature and humidity display are listed below.

Bahan inti	Industrial LCD with platinum temperature and capacitive RH sensing in 304 stainless steel bezel housing
Ketebalan Panel (Panel Thickness)	35-75 mm display depth
Efektif lebar	160-300 mm front width
Panjang maksimum	Up to 380 mm display height
Baja menghadap ketebalan	0-1.2 mm; optional 304 stainless front bezel
Kepadatan inti (core density)	7900-8030 kg/m³ for stainless bezel components
Konduktivitas Termal (Thermal Conductivity)	14-17 W/(m·K) for 304 stainless steel bezel
Permukaan selesai	Brushed stainless bezel with black display and blue-green numeric graphics
Jenis Bersama	Flush or surface wall mount with integrated vents or remote-probe connector
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Integrated or remote sensorWhite powder-coated or brushed stainless bezelDew-point calculation and relay outputsModbus or BACnet communication

Planning a Temperature and Humidity Display specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami