Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Systèmes de contrôle des salles blanches et de surveillance environnementale
Affichage de température et d'humidité par
A dual-parameter wall display that shows cleanroom temperature and relative humidity in large, independently alarmed readings.
- Dual Large Readings
- Independent T and RH Limits
- Local or Remote Sensors
- Dew-Point Display Option
Introduction de produit
The temperature and humidity display presents both room variables on a high-contrast screen without hiding one value behind a menu. It can use an integrated ventilated sensor or receive measurements from a remote transmitter located at a more representative point. Independent temperature and humidity limits drive color changes, buzzer or relay output. Optional dew-point calculation helps operators interpret moisture condition when room temperature changes, and network output sends the live values to centralized monitoring.
Key Features
Independent alarm bands prevent one variable from masking the other.
Remote sensor input separates the display location from the measurement location when needed.
Optional dew-point calculation adds moisture context without installing another sensor.
Préoccupations du client produit
The most visible display location is not always the best measurement point, especially near doors, lights or warm wall cavities.
A warm display enclosure biases the integrated temperature sensor.Remote-probe input places the sensing element away from display heat and wall effects.
Humidity appears normal only because room temperature has changed.Temperature, RH and optional dew point are shown together for clearer interpretation.
One alarm color does not show which variable is abnormal.Separate temperature and humidity fields change status independently.
Small values cannot be read from the cleanroom corridor.Large high-contrast digits prioritize the two live measurements.
Les applications typiques
Cleanroom entrance displaysControlled storage roomsLaboratory environmental indicationProduction-area comfort monitoring
Paramètres techniques
Typical materials and dimensions for a cleanroom temperature and humidity display are listed below.
| Matériaux de base | Industrial LCD with platinum temperature and capacitive RH sensing in 304 stainless steel bezel housing |
|---|---|
| Panneau épaisseur | 35-75 mm display depth |
| Largeur effective | 160-300 mm front width |
| Longueur maximale | Up to 380 mm display height |
| Acier face épaisseur | 0-1.2 mm; optional 304 stainless front bezel |
| Densité Core | 7900-8030 kg/m³ for stainless bezel components |
| Conductivité thermique | 14-17 W/(m·K) for 304 stainless steel bezel |
| surface finie | Brushed stainless bezel with black display and blue-green numeric graphics |
| Type joint | Flush or surface wall mount with integrated vents or remote-probe connector |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Integrated or remote sensorWhite powder-coated or brushed stainless bezelDew-point calculation and relay outputsModbus or BACnet communication
Planning a Temperature and Humidity Display specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
