Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Control de salas limpias y sistemas de monitoreo ambiental
Temperatura y humedad Display
A dual-parameter wall display that shows cleanroom temperature and relative humidity in large, independently alarmed readings.
- Dual Large Readings
- Independent T and RH Limits
- Local or Remote Sensors
- Dew-Point Display Option
Introducción del producto
The temperature and humidity display presents both room variables on a high-contrast screen without hiding one value behind a menu. It can use an integrated ventilated sensor or receive measurements from a remote transmitter located at a more representative point. Independent temperature and humidity limits drive color changes, buzzer or relay output. Optional dew-point calculation helps operators interpret moisture condition when room temperature changes, and network output sends the live values to centralized monitoring.
Características clave
Independent alarm bands prevent one variable from masking the other.
Remote sensor input separates the display location from the measurement location when needed.
Optional dew-point calculation adds moisture context without installing another sensor.
Preocupaciones del producto del cliente
The most visible display location is not always the best measurement point, especially near doors, lights or warm wall cavities.
A warm display enclosure biases the integrated temperature sensor.Remote-probe input places the sensing element away from display heat and wall effects.
Humidity appears normal only because room temperature has changed.Temperature, RH and optional dew point are shown together for clearer interpretation.
One alarm color does not show which variable is abnormal.Separate temperature and humidity fields change status independently.
Small values cannot be read from the cleanroom corridor.Large high-contrast digits prioritize the two live measurements.
Aplicaciones típicas
Cleanroom entrance displaysControlled storage roomsLaboratory environmental indicationProduction-area comfort monitoring
Parámetros técnicos
Typical materials and dimensions for a cleanroom temperature and humidity display are listed below.
| Materiales Core | Industrial LCD with platinum temperature and capacitive RH sensing in 304 stainless steel bezel housing |
|---|---|
| Panel de espesor | 35-75 mm display depth |
| Ancho efectivo | 160-300 mm front width |
| Longitud máxima | Up to 380 mm display height |
| Acero frente a espesor | 0-1.2 mm; optional 304 stainless front bezel |
| Densidad Core | 7900-8030 kg/m³ for stainless bezel components |
| Conductividad térmica | 14-17 W/(m·K) for 304 stainless steel bezel |
| Superficie acabada | Brushed stainless bezel with black display and blue-green numeric graphics |
| Tipo conjunto | Flush or surface wall mount with integrated vents or remote-probe connector |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Integrated or remote sensorWhite powder-coated or brushed stainless bezelDew-point calculation and relay outputsModbus or BACnet communication
Planning a Temperature and Humidity Display specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
