Complete cleanroom temperature and humidity display with black screen and blue-green dual values

클린룸 제어 및 환경 모니터링 시스템 (Cleanroom Control and Environment Monitoring Systems)

온도 및 습도 표시

A dual-parameter wall display that shows cleanroom temperature and relative humidity in large, independently alarmed readings.

Dual Large Readings
Independent T and RH Limits
Local or Remote Sensors
Dew-Point Display Option

견적 요청 제품 찾아보기

상품 소개

The temperature and humidity display presents both room variables on a high-contrast screen without hiding one value behind a menu. It can use an integrated ventilated sensor or receive measurements from a remote transmitter located at a more representative point. Independent temperature and humidity limits drive color changes, buzzer or relay output. Optional dew-point calculation helps operators interpret moisture condition when room temperature changes, and network output sends the live values to centralized monitoring.

주요 기능

Two persistent numeric fields keep temperature and relative humidity visible together.

Independent alarm bands prevent one variable from masking the other.

Remote sensor input separates the display location from the measurement location when needed.

Optional dew-point calculation adds moisture context without installing another sensor.

고객 제품 관심사

The most visible display location is not always the best measurement point, especially near doors, lights or warm wall cavities.

A warm display enclosure biases the integrated temperature sensor.Remote-probe input places the sensing element away from display heat and wall effects.

Humidity appears normal only because room temperature has changed.Temperature, RH and optional dew point are shown together for clearer interpretation.

One alarm color does not show which variable is abnormal.Separate temperature and humidity fields change status independently.

Small values cannot be read from the cleanroom corridor.Large high-contrast digits prioritize the two live measurements.

일반적인 응용 프로그램

Cleanroom entrance displaysControlled storage roomsLaboratory environmental indicationProduction-area comfort monitoring

기술 매개변수

Typical materials and dimensions for a cleanroom temperature and humidity display are listed below.

핵심 재료	Industrial LCD with platinum temperature and capacitive RH sensing in 304 stainless steel bezel housing
패널 두께	35-75 mm display depth
유효 폭	160-300 mm front width
최대 길이	Up to 380 mm display height
강철 면면 두께	0-1.2 mm; optional 304 stainless front bezel
코어 밀도	7900-8030 kg/m³ for stainless bezel components
열전도도 (Thermal Conductivity)	14-17 W/(m·K) for 304 stainless steel bezel
표면 마무리	Brushed stainless bezel with black display and blue-green numeric graphics
접합 유형	Flush or surface wall mount with integrated vents or remote-probe connector
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Integrated or remote sensorWhite powder-coated or brushed stainless bezelDew-point calculation and relay outputsModbus or BACnet communication

Planning a Temperature and Humidity Display specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.