Complete cleanroom temperature and humidity display with black screen and blue-green dual values

Sistem Kawalan Bilik Bersih dan Pemantauan Alam Sekitar

Paparan suhu dan kelembapan

A dual-parameter wall display that shows cleanroom temperature and relative humidity in large, independently alarmed readings.

Dual Large Readings
Independent T and RH Limits
Local or Remote Sensors
Dew-Point Display Option

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The temperature and humidity display presents both room variables on a high-contrast screen without hiding one value behind a menu. It can use an integrated ventilated sensor or receive measurements from a remote transmitter located at a more representative point. Independent temperature and humidity limits drive color changes, buzzer or relay output. Optional dew-point calculation helps operators interpret moisture condition when room temperature changes, and network output sends the live values to centralized monitoring.

Ciri-ciri Utama

Two persistent numeric fields keep temperature and relative humidity visible together.

Independent alarm bands prevent one variable from masking the other.

Remote sensor input separates the display location from the measurement location when needed.

Optional dew-point calculation adds moisture context without installing another sensor.

Kebimbangan Produk Pelanggan

The most visible display location is not always the best measurement point, especially near doors, lights or warm wall cavities.

A warm display enclosure biases the integrated temperature sensor.Remote-probe input places the sensing element away from display heat and wall effects.

Humidity appears normal only because room temperature has changed.Temperature, RH and optional dew point are shown together for clearer interpretation.

One alarm color does not show which variable is abnormal.Separate temperature and humidity fields change status independently.

Small values cannot be read from the cleanroom corridor.Large high-contrast digits prioritize the two live measurements.

Permohonan yang biasa

Cleanroom entrance displaysControlled storage roomsLaboratory environmental indicationProduction-area comfort monitoring

Parameter teknikal

Typical materials and dimensions for a cleanroom temperature and humidity display are listed below.

Bahan Teras	Industrial LCD with platinum temperature and capacitive RH sensing in 304 stainless steel bezel housing
Ketebalan Panel	35-75 mm display depth
Lebar berkesan	160-300 mm front width
Panjang maksimum	Up to 380 mm display height
Keluli Menghadapi Ketebalan	0-1.2 mm; optional 304 stainless front bezel
Ketumpatan teras	7900-8030 kg/m³ for stainless bezel components
Kekonduksian Terma	14-17 W/(m·K) for 304 stainless steel bezel
Kemasan permukaan	Brushed stainless bezel with black display and blue-green numeric graphics
Jenis Bersatu	Flush or surface wall mount with integrated vents or remote-probe connector
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Integrated or remote sensorWhite powder-coated or brushed stainless bezelDew-point calculation and relay outputsModbus or BACnet communication

Planning a Temperature and Humidity Display specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami