Complete cleanroom temperature and humidity display with black screen and blue-green dual values

Temiz Oda Kontrolü ve Çevre İzleme Sistemleri

Sıcaklık ve nem ekranı

A dual-parameter wall display that shows cleanroom temperature and relative humidity in large, independently alarmed readings.

Dual Large Readings
Independent T and RH Limits
Local or Remote Sensors
Dew-Point Display Option

Alıntı isteği Browse ürünleri

Ürün tanıtımı

The temperature and humidity display presents both room variables on a high-contrast screen without hiding one value behind a menu. It can use an integrated ventilated sensor or receive measurements from a remote transmitter located at a more representative point. Independent temperature and humidity limits drive color changes, buzzer or relay output. Optional dew-point calculation helps operators interpret moisture condition when room temperature changes, and network output sends the live values to centralized monitoring.

Ana Özellikler

Two persistent numeric fields keep temperature and relative humidity visible together.

Independent alarm bands prevent one variable from masking the other.

Remote sensor input separates the display location from the measurement location when needed.

Optional dew-point calculation adds moisture context without installing another sensor.

Müşteri Ürün Sorunları

The most visible display location is not always the best measurement point, especially near doors, lights or warm wall cavities.

A warm display enclosure biases the integrated temperature sensor.Remote-probe input places the sensing element away from display heat and wall effects.

Humidity appears normal only because room temperature has changed.Temperature, RH and optional dew point are shown together for clearer interpretation.

One alarm color does not show which variable is abnormal.Separate temperature and humidity fields change status independently.

Small values cannot be read from the cleanroom corridor.Large high-contrast digits prioritize the two live measurements.

Tipik uygulamalar

Cleanroom entrance displaysControlled storage roomsLaboratory environmental indicationProduction-area comfort monitoring

Teknik parametreler

Typical materials and dimensions for a cleanroom temperature and humidity display are listed below.

Temel malzemeler	Industrial LCD with platinum temperature and capacitive RH sensing in 304 stainless steel bezel housing
Panel kalınlığı	35-75 mm display depth
Effective Width (Etkili Genişlik)	160-300 mm front width
Maksimum uzunluk	Up to 380 mm display height
Çelik yüz yüze kalınlığı	0-1.2 mm; optional 304 stainless front bezel
Core Density (Çekirdek Yoğunluğu)	7900-8030 kg/m³ for stainless bezel components
Termal İletkenlik	14-17 W/(m·K) for 304 stainless steel bezel
Yüzey bitirme	Brushed stainless bezel with black display and blue-green numeric graphics
Ortak tip	Flush or surface wall mount with integrated vents or remote-probe connector
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Integrated or remote sensorWhite powder-coated or brushed stainless bezelDew-point calculation and relay outputsModbus or BACnet communication

Planning a Temperature and Humidity Display specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun