English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
إضاءة الغرف النظيفة والمعدات الكهربائية
Teardrop غرف نظيفة ضوء
A narrow suspended LED luminaire whose tapered cross-section reduces disturbance beneath laminar-flow ceiling filters.
- Aerodynamic Teardrop Profile
- Laminar-Flow Friendly
- Sealed Extruded Body
- Continuous Linear Optic
مقدمة المنتج
This luminaire hangs between filter modules on slim suspension points and places its light engine inside a smooth tapered aluminum extrusion. The rounded leading edge and narrow lower profile allow downward air to pass around the fixture with less wake than a rectangular housing. A continuous snap-in diffuser closes the light channel, while end caps and cable entries are gasketed to keep the body smooth and cleanable.
الخصائص الرئيسية
A continuous diffuser eliminates repeated lens joints along the illuminated run.
Slim stainless suspension stems keep the fixture aligned between filter banks.
Sealed end caps protect the LED boards and driver wiring.
The matte white housing reflects room light without mirror-like glare.
مخاوف المنتج للعملاء
Lighting installed below a laminar ceiling must provide useful illumination without creating a large wake or hard-to-clean top ledge.
Box-shaped fittings block downward air and create turbulent shadows.A streamlined teardrop section divides and rejoins the airflow around a narrow body.
Multiple small fixtures add many suspension and cleaning points.Long continuous runs reduce the number of bodies and end joints.
Open lens channels capture dust above the work zone.A sealed diffuser and gasketed end caps close the optical compartment.
Uneven hanging height disrupts both airflow and visual alignment.Adjustable paired suspension stems level each linear section precisely.
تطبيقات نموذجية
Unidirectional airflow roomsAseptic processing suitesLaminar-flow filling linesSterile compounding ceilings
المعلمات الفنية
Typical configurable construction ranges for a teardrop cleanroom LED luminaire are listed below.
| المواد الأساسية | Extruded aluminum teardrop housing with LED boards, internal driver channel and opal polycarbonate lens |
|---|---|
| سمك اللوحة | 80-140 mm overall tapered body height |
| العرض الفعال | 70-130 mm maximum body width |
| الحد الأقصى الطول | Up to 3000 mm per continuous luminaire section |
| الصلب يواجه سمك | 1.0-1.5 mm stainless suspension stems and formed end hardware |
| الكثافة الأساسية | Approximately 2700 kg/m³ for the aluminum housing |
| الموصلية الحرارية | 160-205 W/(m·K) for the aluminum extrusion |
| إنهاء السطح | Antimicrobial-compatible matte white powder coat with smooth opal lower diffuser |
| نوع المشترك | Gasketed end caps, sealed cable entry and continuous snap-fit diffuser channel |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Single sections or linked continuous rowsDirect-only or direct/indirect lightRemote emergency batteryAdjustable stainless suspension kit
Planning a Teardrop Cleanroom Light specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
