Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Éclairage de salle blanche et équipements électriques
Teardrop Cleanroom Lumière
A narrow suspended LED luminaire whose tapered cross-section reduces disturbance beneath laminar-flow ceiling filters.
- Aerodynamic Teardrop Profile
- Laminar-Flow Friendly
- Sealed Extruded Body
- Continuous Linear Optic
Introduction de produit
This luminaire hangs between filter modules on slim suspension points and places its light engine inside a smooth tapered aluminum extrusion. The rounded leading edge and narrow lower profile allow downward air to pass around the fixture with less wake than a rectangular housing. A continuous snap-in diffuser closes the light channel, while end caps and cable entries are gasketed to keep the body smooth and cleanable.
Key Features
A continuous diffuser eliminates repeated lens joints along the illuminated run.
Slim stainless suspension stems keep the fixture aligned between filter banks.
Sealed end caps protect the LED boards and driver wiring.
The matte white housing reflects room light without mirror-like glare.
Préoccupations du client produit
Lighting installed below a laminar ceiling must provide useful illumination without creating a large wake or hard-to-clean top ledge.
Box-shaped fittings block downward air and create turbulent shadows.A streamlined teardrop section divides and rejoins the airflow around a narrow body.
Multiple small fixtures add many suspension and cleaning points.Long continuous runs reduce the number of bodies and end joints.
Open lens channels capture dust above the work zone.A sealed diffuser and gasketed end caps close the optical compartment.
Uneven hanging height disrupts both airflow and visual alignment.Adjustable paired suspension stems level each linear section precisely.
Les applications typiques
Unidirectional airflow roomsAseptic processing suitesLaminar-flow filling linesSterile compounding ceilings
Paramètres techniques
Typical configurable construction ranges for a teardrop cleanroom LED luminaire are listed below.
| Matériaux de base | Extruded aluminum teardrop housing with LED boards, internal driver channel and opal polycarbonate lens |
|---|---|
| Panneau épaisseur | 80-140 mm overall tapered body height |
| Largeur effective | 70-130 mm maximum body width |
| Longueur maximale | Up to 3000 mm per continuous luminaire section |
| Acier face épaisseur | 1.0-1.5 mm stainless suspension stems and formed end hardware |
| Densité Core | Approximately 2700 kg/m³ for the aluminum housing |
| Conductivité thermique | 160-205 W/(m·K) for the aluminum extrusion |
| surface finie | Antimicrobial-compatible matte white powder coat with smooth opal lower diffuser |
| Type joint | Gasketed end caps, sealed cable entry and continuous snap-fit diffuser channel |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Single sections or linked continuous rowsDirect-only or direct/indirect lightRemote emergency batteryAdjustable stainless suspension kit
Planning a Teardrop Cleanroom Light specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
