English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Освещение и электрическое оборудование в чистых помещениях
Teardrop Cleanroom Light
A narrow suspended LED luminaire whose tapered cross-section reduces disturbance beneath laminar-flow ceiling filters.
- Aerodynamic Teardrop Profile
- Laminar-Flow Friendly
- Sealed Extruded Body
- Continuous Linear Optic
Введение продукции
This luminaire hangs between filter modules on slim suspension points and places its light engine inside a smooth tapered aluminum extrusion. The rounded leading edge and narrow lower profile allow downward air to pass around the fixture with less wake than a rectangular housing. A continuous snap-in diffuser closes the light channel, while end caps and cable entries are gasketed to keep the body smooth and cleanable.
Основные характеристики
A continuous diffuser eliminates repeated lens joints along the illuminated run.
Slim stainless suspension stems keep the fixture aligned between filter banks.
Sealed end caps protect the LED boards and driver wiring.
The matte white housing reflects room light without mirror-like glare.
Обеспокоенность клиентов продуктами
Lighting installed below a laminar ceiling must provide useful illumination without creating a large wake or hard-to-clean top ledge.
Box-shaped fittings block downward air and create turbulent shadows.A streamlined teardrop section divides and rejoins the airflow around a narrow body.
Multiple small fixtures add many suspension and cleaning points.Long continuous runs reduce the number of bodies and end joints.
Open lens channels capture dust above the work zone.A sealed diffuser and gasketed end caps close the optical compartment.
Uneven hanging height disrupts both airflow and visual alignment.Adjustable paired suspension stems level each linear section precisely.
Типичные приложения
Unidirectional airflow roomsAseptic processing suitesLaminar-flow filling linesSterile compounding ceilings
Технические параметры
Typical configurable construction ranges for a teardrop cleanroom LED luminaire are listed below.
| Основной материал | Extruded aluminum teardrop housing with LED boards, internal driver channel and opal polycarbonate lens |
|---|---|
| Толщина панели | 80-140 mm overall tapered body height |
| эффективная ширина | 70-130 mm maximum body width |
| Максимальная длина | Up to 3000 mm per continuous luminaire section |
| Толщина линий стали | 1.0-1.5 mm stainless suspension stems and formed end hardware |
| Плотность ядра | Approximately 2700 kg/m³ for the aluminum housing |
| Теплопроводимость | 160-205 W/(m·K) for the aluminum extrusion |
| Поверхностная отделка | Antimicrobial-compatible matte white powder coat with smooth opal lower diffuser |
| Объединенный тип | Gasketed end caps, sealed cable entry and continuous snap-fit diffuser channel |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Single sections or linked continuous rowsDirect-only or direct/indirect lightRemote emergency batteryAdjustable stainless suspension kit
Planning a Teardrop Cleanroom Light specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
