Complete white teardrop cleanroom LED luminaire in three-quarter view

Cleanroom Lighting dan Peralatan Listrik

Teardrop Cleanroom Cahaya

A narrow suspended LED luminaire whose tapered cross-section reduces disturbance beneath laminar-flow ceiling filters.

Aerodynamic Teardrop Profile
Laminar-Flow Friendly
Sealed Extruded Body
Continuous Linear Optic

Perkenalan produk

This luminaire hangs between filter modules on slim suspension points and places its light engine inside a smooth tapered aluminum extrusion. The rounded leading edge and narrow lower profile allow downward air to pass around the fixture with less wake than a rectangular housing. A continuous snap-in diffuser closes the light channel, while end caps and cable entries are gasketed to keep the body smooth and cleanable.

Fitur utama:

The tapered body minimizes broad horizontal surfaces beneath HEPA ceiling modules.

A continuous diffuser eliminates repeated lens joints along the illuminated run.

Slim stainless suspension stems keep the fixture aligned between filter banks.

Sealed end caps protect the LED boards and driver wiring.

The matte white housing reflects room light without mirror-like glare.

Kekhawatiran produk pelanggan

Lighting installed below a laminar ceiling must provide useful illumination without creating a large wake or hard-to-clean top ledge.

Box-shaped fittings block downward air and create turbulent shadows.A streamlined teardrop section divides and rejoins the airflow around a narrow body.

Multiple small fixtures add many suspension and cleaning points.Long continuous runs reduce the number of bodies and end joints.

Open lens channels capture dust above the work zone.A sealed diffuser and gasketed end caps close the optical compartment.

Uneven hanging height disrupts both airflow and visual alignment.Adjustable paired suspension stems level each linear section precisely.

Aplikasi yang Tipis

Unidirectional airflow roomsAseptic processing suitesLaminar-flow filling linesSterile compounding ceilings

Parameter teknis

Typical configurable construction ranges for a teardrop cleanroom LED luminaire are listed below.

Bahan inti	Extruded aluminum teardrop housing with LED boards, internal driver channel and opal polycarbonate lens
Ketebalan Panel (Panel Thickness)	80-140 mm overall tapered body height
Efektif lebar	70-130 mm maximum body width
Panjang maksimum	Up to 3000 mm per continuous luminaire section
Baja menghadap ketebalan	1.0-1.5 mm stainless suspension stems and formed end hardware
Kepadatan inti (core density)	Approximately 2700 kg/m³ for the aluminum housing
Konduktivitas Termal (Thermal Conductivity)	160-205 W/(m·K) for the aluminum extrusion
Permukaan selesai	Antimicrobial-compatible matte white powder coat with smooth opal lower diffuser
Jenis Bersama	Gasketed end caps, sealed cable entry and continuous snap-fit diffuser channel
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Single sections or linked continuous rowsDirect-only or direct/indirect lightRemote emergency batteryAdjustable stainless suspension kit

Planning a Teardrop Cleanroom Light specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami