Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Iluminación de sala limpia y equipos eléctricos
Teardrop Cleanroom Luz
A narrow suspended LED luminaire whose tapered cross-section reduces disturbance beneath laminar-flow ceiling filters.
- Aerodynamic Teardrop Profile
- Laminar-Flow Friendly
- Sealed Extruded Body
- Continuous Linear Optic
Introducción del producto
This luminaire hangs between filter modules on slim suspension points and places its light engine inside a smooth tapered aluminum extrusion. The rounded leading edge and narrow lower profile allow downward air to pass around the fixture with less wake than a rectangular housing. A continuous snap-in diffuser closes the light channel, while end caps and cable entries are gasketed to keep the body smooth and cleanable.
Características clave
A continuous diffuser eliminates repeated lens joints along the illuminated run.
Slim stainless suspension stems keep the fixture aligned between filter banks.
Sealed end caps protect the LED boards and driver wiring.
The matte white housing reflects room light without mirror-like glare.
Preocupaciones del producto del cliente
Lighting installed below a laminar ceiling must provide useful illumination without creating a large wake or hard-to-clean top ledge.
Box-shaped fittings block downward air and create turbulent shadows.A streamlined teardrop section divides and rejoins the airflow around a narrow body.
Multiple small fixtures add many suspension and cleaning points.Long continuous runs reduce the number of bodies and end joints.
Open lens channels capture dust above the work zone.A sealed diffuser and gasketed end caps close the optical compartment.
Uneven hanging height disrupts both airflow and visual alignment.Adjustable paired suspension stems level each linear section precisely.
Aplicaciones típicas
Unidirectional airflow roomsAseptic processing suitesLaminar-flow filling linesSterile compounding ceilings
Parámetros técnicos
Typical configurable construction ranges for a teardrop cleanroom LED luminaire are listed below.
| Materiales Core | Extruded aluminum teardrop housing with LED boards, internal driver channel and opal polycarbonate lens |
|---|---|
| Panel de espesor | 80-140 mm overall tapered body height |
| Ancho efectivo | 70-130 mm maximum body width |
| Longitud máxima | Up to 3000 mm per continuous luminaire section |
| Acero frente a espesor | 1.0-1.5 mm stainless suspension stems and formed end hardware |
| Densidad Core | Approximately 2700 kg/m³ for the aluminum housing |
| Conductividad térmica | 160-205 W/(m·K) for the aluminum extrusion |
| Superficie acabada | Antimicrobial-compatible matte white powder coat with smooth opal lower diffuser |
| Tipo conjunto | Gasketed end caps, sealed cable entry and continuous snap-fit diffuser channel |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Single sections or linked continuous rowsDirect-only or direct/indirect lightRemote emergency batteryAdjustable stainless suspension kit
Planning a Teardrop Cleanroom Light specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
