Complete white teardrop cleanroom LED luminaire in three-quarter view

クリーンルーム照明 · 電気機器

涙のクリーンルームライト

A narrow suspended LED luminaire whose tapered cross-section reduces disturbance beneath laminar-flow ceiling filters.

Aerodynamic Teardrop Profile
Laminar-Flow Friendly
Sealed Extruded Body
Continuous Linear Optic

商品紹介

This luminaire hangs between filter modules on slim suspension points and places its light engine inside a smooth tapered aluminum extrusion. The rounded leading edge and narrow lower profile allow downward air to pass around the fixture with less wake than a rectangular housing. A continuous snap-in diffuser closes the light channel, while end caps and cable entries are gasketed to keep the body smooth and cleanable.

主要な特徴

The tapered body minimizes broad horizontal surfaces beneath HEPA ceiling modules.

A continuous diffuser eliminates repeated lens joints along the illuminated run.

Slim stainless suspension stems keep the fixture aligned between filter banks.

Sealed end caps protect the LED boards and driver wiring.

The matte white housing reflects room light without mirror-like glare.

お客様の製品に関する懸念事項

Lighting installed below a laminar ceiling must provide useful illumination without creating a large wake or hard-to-clean top ledge.

Box-shaped fittings block downward air and create turbulent shadows.A streamlined teardrop section divides and rejoins the airflow around a narrow body.

Multiple small fixtures add many suspension and cleaning points.Long continuous runs reduce the number of bodies and end joints.

Open lens channels capture dust above the work zone.A sealed diffuser and gasketed end caps close the optical compartment.

Uneven hanging height disrupts both airflow and visual alignment.Adjustable paired suspension stems level each linear section precisely.

典型的な用途

Unidirectional airflow roomsAseptic processing suitesLaminar-flow filling linesSterile compounding ceilings

技術的なパラメータ

Typical configurable construction ranges for a teardrop cleanroom LED luminaire are listed below.

コア材料	Extruded aluminum teardrop housing with LED boards, internal driver channel and opal polycarbonate lens
パネルの厚さ	80-140 mm overall tapered body height
有効幅	70-130 mm maximum body width
最大長さ	Up to 3000 mm per continuous luminaire section
鋼鉄の厚さを直面する	1.0-1.5 mm stainless suspension stems and formed end hardware
コア密度	Approximately 2700 kg/m³ for the aluminum housing
熱伝導率	160-205 W/(m·K) for the aluminum extrusion
表面仕上げ	Antimicrobial-compatible matte white powder coat with smooth opal lower diffuser
ジョイントタイプ	Gasketed end caps, sealed cable entry and continuous snap-fit diffuser channel
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Single sections or linked continuous rowsDirect-only or direct/indirect lightRemote emergency batteryAdjustable stainless suspension kit

Planning a Teardrop Cleanroom Light specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する