Complete white teardrop cleanroom LED luminaire in three-quarter view

클린룸 조명 및 전기 장비

Teardrop 클린룸 조명

A narrow suspended LED luminaire whose tapered cross-section reduces disturbance beneath laminar-flow ceiling filters.

Aerodynamic Teardrop Profile
Laminar-Flow Friendly
Sealed Extruded Body
Continuous Linear Optic

견적 요청 제품 찾아보기

상품 소개

This luminaire hangs between filter modules on slim suspension points and places its light engine inside a smooth tapered aluminum extrusion. The rounded leading edge and narrow lower profile allow downward air to pass around the fixture with less wake than a rectangular housing. A continuous snap-in diffuser closes the light channel, while end caps and cable entries are gasketed to keep the body smooth and cleanable.

주요 기능

The tapered body minimizes broad horizontal surfaces beneath HEPA ceiling modules.

A continuous diffuser eliminates repeated lens joints along the illuminated run.

Slim stainless suspension stems keep the fixture aligned between filter banks.

Sealed end caps protect the LED boards and driver wiring.

The matte white housing reflects room light without mirror-like glare.

고객 제품 관심사

Lighting installed below a laminar ceiling must provide useful illumination without creating a large wake or hard-to-clean top ledge.

Box-shaped fittings block downward air and create turbulent shadows.A streamlined teardrop section divides and rejoins the airflow around a narrow body.

Multiple small fixtures add many suspension and cleaning points.Long continuous runs reduce the number of bodies and end joints.

Open lens channels capture dust above the work zone.A sealed diffuser and gasketed end caps close the optical compartment.

Uneven hanging height disrupts both airflow and visual alignment.Adjustable paired suspension stems level each linear section precisely.

일반적인 응용 프로그램

Unidirectional airflow roomsAseptic processing suitesLaminar-flow filling linesSterile compounding ceilings

기술 매개변수

Typical configurable construction ranges for a teardrop cleanroom LED luminaire are listed below.

핵심 재료	Extruded aluminum teardrop housing with LED boards, internal driver channel and opal polycarbonate lens
패널 두께	80-140 mm overall tapered body height
유효 폭	70-130 mm maximum body width
최대 길이	Up to 3000 mm per continuous luminaire section
강철 면면 두께	1.0-1.5 mm stainless suspension stems and formed end hardware
코어 밀도	Approximately 2700 kg/m³ for the aluminum housing
열전도도 (Thermal Conductivity)	160-205 W/(m·K) for the aluminum extrusion
표면 마무리	Antimicrobial-compatible matte white powder coat with smooth opal lower diffuser
접합 유형	Gasketed end caps, sealed cable entry and continuous snap-fit diffuser channel
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Single sections or linked continuous rowsDirect-only or direct/indirect lightRemote emergency batteryAdjustable stainless suspension kit

Planning a Teardrop Cleanroom Light specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.