İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Aydınlatma ve Elektrik Ekipmanları
Teardrop temiz oda ışığı
A narrow suspended LED luminaire whose tapered cross-section reduces disturbance beneath laminar-flow ceiling filters.
- Aerodynamic Teardrop Profile
- Laminar-Flow Friendly
- Sealed Extruded Body
- Continuous Linear Optic
Ürün tanıtımı
This luminaire hangs between filter modules on slim suspension points and places its light engine inside a smooth tapered aluminum extrusion. The rounded leading edge and narrow lower profile allow downward air to pass around the fixture with less wake than a rectangular housing. A continuous snap-in diffuser closes the light channel, while end caps and cable entries are gasketed to keep the body smooth and cleanable.
Ana Özellikler
A continuous diffuser eliminates repeated lens joints along the illuminated run.
Slim stainless suspension stems keep the fixture aligned between filter banks.
Sealed end caps protect the LED boards and driver wiring.
The matte white housing reflects room light without mirror-like glare.
Müşteri Ürün Sorunları
Lighting installed below a laminar ceiling must provide useful illumination without creating a large wake or hard-to-clean top ledge.
Box-shaped fittings block downward air and create turbulent shadows.A streamlined teardrop section divides and rejoins the airflow around a narrow body.
Multiple small fixtures add many suspension and cleaning points.Long continuous runs reduce the number of bodies and end joints.
Open lens channels capture dust above the work zone.A sealed diffuser and gasketed end caps close the optical compartment.
Uneven hanging height disrupts both airflow and visual alignment.Adjustable paired suspension stems level each linear section precisely.
Tipik uygulamalar
Unidirectional airflow roomsAseptic processing suitesLaminar-flow filling linesSterile compounding ceilings
Teknik parametreler
Typical configurable construction ranges for a teardrop cleanroom LED luminaire are listed below.
| Temel malzemeler | Extruded aluminum teardrop housing with LED boards, internal driver channel and opal polycarbonate lens |
|---|---|
| Panel kalınlığı | 80-140 mm overall tapered body height |
| Effective Width (Etkili Genişlik) | 70-130 mm maximum body width |
| Maksimum uzunluk | Up to 3000 mm per continuous luminaire section |
| Çelik yüz yüze kalınlığı | 1.0-1.5 mm stainless suspension stems and formed end hardware |
| Core Density (Çekirdek Yoğunluğu) | Approximately 2700 kg/m³ for the aluminum housing |
| Termal İletkenlik | 160-205 W/(m·K) for the aluminum extrusion |
| Yüzey bitirme | Antimicrobial-compatible matte white powder coat with smooth opal lower diffuser |
| Ortak tip | Gasketed end caps, sealed cable entry and continuous snap-fit diffuser channel |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Single sections or linked continuous rowsDirect-only or direct/indirect lightRemote emergency batteryAdjustable stainless suspension kit
Planning a Teardrop Cleanroom Light specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
