English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة التحكم في الغرف النظيفة والمراقبة البيئية
Iلمضاء الاستشعار
A ceiling or wall-mounted lux sensor that measures incident light for cleanroom illumination monitoring and dimming control.
- Cosine-Corrected Lux Measurement
- Low-Profile Optical Head
- 0-10 V or 4-20 mA Lux Signal
- Lighting Control Integration
مقدمة المنتج
The cleanroom illuminance sensor uses a photodiode and optical diffuser to measure light arriving from a broad field of view. Cosine correction helps the response represent incident illuminance rather than only light perpendicular to the sensor. Range selection covers typical task-lighting and bright inspection environments. A standard analog or digital output supports light-level monitoring, daylight-responsive dimming and alarm reporting while the smooth white housing blends with clean ceilings.
الخصائص الرئيسية
Selectable lux ranges preserve resolution in both normal work and high-illumination areas.
Low-profile white construction minimizes visual disruption on clean ceilings.
Analog and network outputs connect to lighting controls and environmental monitoring.
مخاوف المنتج للعملاء
Illuminance depends on sensor orientation, shadows and surface reflections, so the measurement point must represent the actual working plane.
A sensor directly under one luminaire overstates the room's average light level.Representative placement and broad optical response reduce local hotspot bias.
Oblique light is under-read by a narrow-angle detector.A cosine-corrected diffuser captures light over a wider incidence angle.
One measurement range saturates in high-intensity inspection zones.Selectable lux ranges match the sensor to ambient or task-light applications.
Dimming causes visible hunting around the target level.Control deadband and time filtering prevent rapid response to small light fluctuations.
تطبيقات نموذجية
Cleanroom task-light monitoringInspection-area illuminationDaylight-responsive dimmingLaboratory lighting verification
المعلمات الفنية
Typical construction values for a cleanroom ceiling illuminance sensor are listed below.
| المواد الأساسية | Silicon photodiode with optical diffuser in UV-stable polycarbonate housing |
|---|---|
| سمك اللوحة | 25-45 mm sensor depth |
| العرض الفعال | 70-110 mm housing diameter |
| الحد الأقصى الطول | Up to 130 mm overall housing dimension |
| الصلب يواجه سمك | 0 mm; non-metallic optical enclosure |
| الكثافة الأساسية | 1180-1220 kg/m³ for polycarbonate housing material |
| الموصلية الحرارية | 0.19-0.22 W/(m·K) for polycarbonate enclosure |
| إنهاء السطح | Matte white body with opal optical dome and discreet blue range mark |
| نوع المشترك | Twist-lock ceiling base or wall plate with rear pluggable signal terminals |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Multiple lux rangesCeiling or wall mountingVoltage or 4-20 mA outputModbus or BACnet communication
Planning a Illuminance Sensor specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
