Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraumsteuerung und Umweltüberwachungssysteme
Beleuchtungssensor
A ceiling or wall-mounted lux sensor that measures incident light for cleanroom illumination monitoring and dimming control.
- Cosine-Corrected Lux Measurement
- Low-Profile Optical Head
- 0-10 V or 4-20 mA Lux Signal
- Lighting Control Integration
Produkteinführung
The cleanroom illuminance sensor uses a photodiode and optical diffuser to measure light arriving from a broad field of view. Cosine correction helps the response represent incident illuminance rather than only light perpendicular to the sensor. Range selection covers typical task-lighting and bright inspection environments. A standard analog or digital output supports light-level monitoring, daylight-responsive dimming and alarm reporting while the smooth white housing blends with clean ceilings.
Key Features
Selectable lux ranges preserve resolution in both normal work and high-illumination areas.
Low-profile white construction minimizes visual disruption on clean ceilings.
Analog and network outputs connect to lighting controls and environmental monitoring.
Kunden Produktbedenken
Illuminance depends on sensor orientation, shadows and surface reflections, so the measurement point must represent the actual working plane.
A sensor directly under one luminaire overstates the room's average light level.Representative placement and broad optical response reduce local hotspot bias.
Oblique light is under-read by a narrow-angle detector.A cosine-corrected diffuser captures light over a wider incidence angle.
One measurement range saturates in high-intensity inspection zones.Selectable lux ranges match the sensor to ambient or task-light applications.
Dimming causes visible hunting around the target level.Control deadband and time filtering prevent rapid response to small light fluctuations.
Typische Anwendungen
Cleanroom task-light monitoringInspection-area illuminationDaylight-responsive dimmingLaboratory lighting verification
Technische Parameter
Typical construction values for a cleanroom ceiling illuminance sensor are listed below.
| Core Material | Silicon photodiode with optical diffuser in UV-stable polycarbonate housing |
|---|---|
| Panel Dicke | 25-45 mm sensor depth |
| Effektive Breite | 70-110 mm housing diameter |
| Maximale Länge | Up to 130 mm overall housing dimension |
| Stahl facing Dicke | 0 mm; non-metallic optical enclosure |
| Kerndichte | 1180-1220 kg/m³ for polycarbonate housing material |
| Thermische Leitfähigkeit | 0.19-0.22 W/(m·K) for polycarbonate enclosure |
| Oberfläche Finish | Matte white body with opal optical dome and discreet blue range mark |
| Gemeinsamer Typ | Twist-lock ceiling base or wall plate with rear pluggable signal terminals |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Multiple lux rangesCeiling or wall mountingVoltage or 4-20 mA outputModbus or BACnet communication
Planning a Illuminance Sensor specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
