Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Control de salas limpias y sistemas de monitoreo ambiental
Sensor de iluminación
A ceiling or wall-mounted lux sensor that measures incident light for cleanroom illumination monitoring and dimming control.
- Cosine-Corrected Lux Measurement
- Low-Profile Optical Head
- 0-10 V or 4-20 mA Lux Signal
- Lighting Control Integration
Introducción del producto
The cleanroom illuminance sensor uses a photodiode and optical diffuser to measure light arriving from a broad field of view. Cosine correction helps the response represent incident illuminance rather than only light perpendicular to the sensor. Range selection covers typical task-lighting and bright inspection environments. A standard analog or digital output supports light-level monitoring, daylight-responsive dimming and alarm reporting while the smooth white housing blends with clean ceilings.
Características clave
Selectable lux ranges preserve resolution in both normal work and high-illumination areas.
Low-profile white construction minimizes visual disruption on clean ceilings.
Analog and network outputs connect to lighting controls and environmental monitoring.
Preocupaciones del producto del cliente
Illuminance depends on sensor orientation, shadows and surface reflections, so the measurement point must represent the actual working plane.
A sensor directly under one luminaire overstates the room's average light level.Representative placement and broad optical response reduce local hotspot bias.
Oblique light is under-read by a narrow-angle detector.A cosine-corrected diffuser captures light over a wider incidence angle.
One measurement range saturates in high-intensity inspection zones.Selectable lux ranges match the sensor to ambient or task-light applications.
Dimming causes visible hunting around the target level.Control deadband and time filtering prevent rapid response to small light fluctuations.
Aplicaciones típicas
Cleanroom task-light monitoringInspection-area illuminationDaylight-responsive dimmingLaboratory lighting verification
Parámetros técnicos
Typical construction values for a cleanroom ceiling illuminance sensor are listed below.
| Materiales Core | Silicon photodiode with optical diffuser in UV-stable polycarbonate housing |
|---|---|
| Panel de espesor | 25-45 mm sensor depth |
| Ancho efectivo | 70-110 mm housing diameter |
| Longitud máxima | Up to 130 mm overall housing dimension |
| Acero frente a espesor | 0 mm; non-metallic optical enclosure |
| Densidad Core | 1180-1220 kg/m³ for polycarbonate housing material |
| Conductividad térmica | 0.19-0.22 W/(m·K) for polycarbonate enclosure |
| Superficie acabada | Matte white body with opal optical dome and discreet blue range mark |
| Tipo conjunto | Twist-lock ceiling base or wall plate with rear pluggable signal terminals |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Multiple lux rangesCeiling or wall mountingVoltage or 4-20 mA outputModbus or BACnet communication
Planning a Illuminance Sensor specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
