İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Kontrolü ve Çevre İzleme Sistemleri
Işık Sensörü
A ceiling or wall-mounted lux sensor that measures incident light for cleanroom illumination monitoring and dimming control.
- Cosine-Corrected Lux Measurement
- Low-Profile Optical Head
- 0-10 V or 4-20 mA Lux Signal
- Lighting Control Integration
Ürün tanıtımı
The cleanroom illuminance sensor uses a photodiode and optical diffuser to measure light arriving from a broad field of view. Cosine correction helps the response represent incident illuminance rather than only light perpendicular to the sensor. Range selection covers typical task-lighting and bright inspection environments. A standard analog or digital output supports light-level monitoring, daylight-responsive dimming and alarm reporting while the smooth white housing blends with clean ceilings.
Ana Özellikler
Selectable lux ranges preserve resolution in both normal work and high-illumination areas.
Low-profile white construction minimizes visual disruption on clean ceilings.
Analog and network outputs connect to lighting controls and environmental monitoring.
Müşteri Ürün Sorunları
Illuminance depends on sensor orientation, shadows and surface reflections, so the measurement point must represent the actual working plane.
A sensor directly under one luminaire overstates the room's average light level.Representative placement and broad optical response reduce local hotspot bias.
Oblique light is under-read by a narrow-angle detector.A cosine-corrected diffuser captures light over a wider incidence angle.
One measurement range saturates in high-intensity inspection zones.Selectable lux ranges match the sensor to ambient or task-light applications.
Dimming causes visible hunting around the target level.Control deadband and time filtering prevent rapid response to small light fluctuations.
Tipik uygulamalar
Cleanroom task-light monitoringInspection-area illuminationDaylight-responsive dimmingLaboratory lighting verification
Teknik parametreler
Typical construction values for a cleanroom ceiling illuminance sensor are listed below.
| Temel malzemeler | Silicon photodiode with optical diffuser in UV-stable polycarbonate housing |
|---|---|
| Panel kalınlığı | 25-45 mm sensor depth |
| Effective Width (Etkili Genişlik) | 70-110 mm housing diameter |
| Maksimum uzunluk | Up to 130 mm overall housing dimension |
| Çelik yüz yüze kalınlığı | 0 mm; non-metallic optical enclosure |
| Core Density (Çekirdek Yoğunluğu) | 1180-1220 kg/m³ for polycarbonate housing material |
| Termal İletkenlik | 0.19-0.22 W/(m·K) for polycarbonate enclosure |
| Yüzey bitirme | Matte white body with opal optical dome and discreet blue range mark |
| Ortak tip | Twist-lock ceiling base or wall plate with rear pluggable signal terminals |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Multiple lux rangesCeiling or wall mountingVoltage or 4-20 mA outputModbus or BACnet communication
Planning a Illuminance Sensor specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
