English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Системы контроля за чистыми помещениями и экологического мониторинга
Датчик освещенности
A ceiling or wall-mounted lux sensor that measures incident light for cleanroom illumination monitoring and dimming control.
- Cosine-Corrected Lux Measurement
- Low-Profile Optical Head
- 0-10 V or 4-20 mA Lux Signal
- Lighting Control Integration
Введение продукции
The cleanroom illuminance sensor uses a photodiode and optical diffuser to measure light arriving from a broad field of view. Cosine correction helps the response represent incident illuminance rather than only light perpendicular to the sensor. Range selection covers typical task-lighting and bright inspection environments. A standard analog or digital output supports light-level monitoring, daylight-responsive dimming and alarm reporting while the smooth white housing blends with clean ceilings.
Основные характеристики
Selectable lux ranges preserve resolution in both normal work and high-illumination areas.
Low-profile white construction minimizes visual disruption on clean ceilings.
Analog and network outputs connect to lighting controls and environmental monitoring.
Обеспокоенность клиентов продуктами
Illuminance depends on sensor orientation, shadows and surface reflections, so the measurement point must represent the actual working plane.
A sensor directly under one luminaire overstates the room's average light level.Representative placement and broad optical response reduce local hotspot bias.
Oblique light is under-read by a narrow-angle detector.A cosine-corrected diffuser captures light over a wider incidence angle.
One measurement range saturates in high-intensity inspection zones.Selectable lux ranges match the sensor to ambient or task-light applications.
Dimming causes visible hunting around the target level.Control deadband and time filtering prevent rapid response to small light fluctuations.
Типичные приложения
Cleanroom task-light monitoringInspection-area illuminationDaylight-responsive dimmingLaboratory lighting verification
Технические параметры
Typical construction values for a cleanroom ceiling illuminance sensor are listed below.
| Основной материал | Silicon photodiode with optical diffuser in UV-stable polycarbonate housing |
|---|---|
| Толщина панели | 25-45 mm sensor depth |
| эффективная ширина | 70-110 mm housing diameter |
| Максимальная длина | Up to 130 mm overall housing dimension |
| Толщина линий стали | 0 mm; non-metallic optical enclosure |
| Плотность ядра | 1180-1220 kg/m³ for polycarbonate housing material |
| Теплопроводимость | 0.19-0.22 W/(m·K) for polycarbonate enclosure |
| Поверхностная отделка | Matte white body with opal optical dome and discreet blue range mark |
| Объединенный тип | Twist-lock ceiling base or wall plate with rear pluggable signal terminals |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Multiple lux rangesCeiling or wall mountingVoltage or 4-20 mA outputModbus or BACnet communication
Planning a Illuminance Sensor specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
