Complete matte-white cleanroom illuminance sensor with opal optical dome

クリーンルーム管理 · 環境モニタリングシステム

照度センサー

A ceiling or wall-mounted lux sensor that measures incident light for cleanroom illumination monitoring and dimming control.

Cosine-Corrected Lux Measurement
Low-Profile Optical Head
0-10 V or 4-20 mA Lux Signal
Lighting Control Integration

見積もりリクエスト製品案内

商品紹介

The cleanroom illuminance sensor uses a photodiode and optical diffuser to measure light arriving from a broad field of view. Cosine correction helps the response represent incident illuminance rather than only light perpendicular to the sensor. Range selection covers typical task-lighting and bright inspection environments. A standard analog or digital output supports light-level monitoring, daylight-responsive dimming and alarm reporting while the smooth white housing blends with clean ceilings.

主要な特徴

A diffusing optical dome approximates cosine response across the sensor field of view.

Selectable lux ranges preserve resolution in both normal work and high-illumination areas.

Low-profile white construction minimizes visual disruption on clean ceilings.

Analog and network outputs connect to lighting controls and environmental monitoring.

お客様の製品に関する懸念事項

Illuminance depends on sensor orientation, shadows and surface reflections, so the measurement point must represent the actual working plane.

A sensor directly under one luminaire overstates the room's average light level.Representative placement and broad optical response reduce local hotspot bias.

Oblique light is under-read by a narrow-angle detector.A cosine-corrected diffuser captures light over a wider incidence angle.

One measurement range saturates in high-intensity inspection zones.Selectable lux ranges match the sensor to ambient or task-light applications.

Dimming causes visible hunting around the target level.Control deadband and time filtering prevent rapid response to small light fluctuations.

典型的な用途

Cleanroom task-light monitoringInspection-area illuminationDaylight-responsive dimmingLaboratory lighting verification

技術的なパラメータ

Typical construction values for a cleanroom ceiling illuminance sensor are listed below.

コア材料	Silicon photodiode with optical diffuser in UV-stable polycarbonate housing
パネルの厚さ	25-45 mm sensor depth
有効幅	70-110 mm housing diameter
最大長さ	Up to 130 mm overall housing dimension
鋼鉄の厚さを直面する	0 mm; non-metallic optical enclosure
コア密度	1180-1220 kg/m³ for polycarbonate housing material
熱伝導率	0.19-0.22 W/(m·K) for polycarbonate enclosure
表面仕上げ	Matte white body with opal optical dome and discreet blue range mark
ジョイントタイプ	Twist-lock ceiling base or wall plate with rear pluggable signal terminals
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Multiple lux rangesCeiling or wall mountingVoltage or 4-20 mA outputModbus or BACnet communication

Planning a Illuminance Sensor specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する