Complete matte-white cleanroom illuminance sensor with opal optical dome

Sistem Kawalan Bilik Bersih dan Pemantauan Alam Sekitar

Sensor Pencahayaan

A ceiling or wall-mounted lux sensor that measures incident light for cleanroom illumination monitoring and dimming control.

Cosine-Corrected Lux Measurement
Low-Profile Optical Head
0-10 V or 4-20 mA Lux Signal
Lighting Control Integration

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The cleanroom illuminance sensor uses a photodiode and optical diffuser to measure light arriving from a broad field of view. Cosine correction helps the response represent incident illuminance rather than only light perpendicular to the sensor. Range selection covers typical task-lighting and bright inspection environments. A standard analog or digital output supports light-level monitoring, daylight-responsive dimming and alarm reporting while the smooth white housing blends with clean ceilings.

Ciri-ciri Utama

A diffusing optical dome approximates cosine response across the sensor field of view.

Selectable lux ranges preserve resolution in both normal work and high-illumination areas.

Low-profile white construction minimizes visual disruption on clean ceilings.

Analog and network outputs connect to lighting controls and environmental monitoring.

Kebimbangan Produk Pelanggan

Illuminance depends on sensor orientation, shadows and surface reflections, so the measurement point must represent the actual working plane.

A sensor directly under one luminaire overstates the room's average light level.Representative placement and broad optical response reduce local hotspot bias.

Oblique light is under-read by a narrow-angle detector.A cosine-corrected diffuser captures light over a wider incidence angle.

One measurement range saturates in high-intensity inspection zones.Selectable lux ranges match the sensor to ambient or task-light applications.

Dimming causes visible hunting around the target level.Control deadband and time filtering prevent rapid response to small light fluctuations.

Permohonan yang biasa

Cleanroom task-light monitoringInspection-area illuminationDaylight-responsive dimmingLaboratory lighting verification

Parameter teknikal

Typical construction values for a cleanroom ceiling illuminance sensor are listed below.

Bahan Teras	Silicon photodiode with optical diffuser in UV-stable polycarbonate housing
Ketebalan Panel	25-45 mm sensor depth
Lebar berkesan	70-110 mm housing diameter
Panjang maksimum	Up to 130 mm overall housing dimension
Keluli Menghadapi Ketebalan	0 mm; non-metallic optical enclosure
Ketumpatan teras	1180-1220 kg/m³ for polycarbonate housing material
Kekonduksian Terma	0.19-0.22 W/(m·K) for polycarbonate enclosure
Kemasan permukaan	Matte white body with opal optical dome and discreet blue range mark
Jenis Bersatu	Twist-lock ceiling base or wall plate with rear pluggable signal terminals
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Multiple lux rangesCeiling or wall mountingVoltage or 4-20 mA outputModbus or BACnet communication

Planning a Illuminance Sensor specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami