English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات الغرف النظيفة المحددة للصناعة
محطة النظافة لتجهيز الأغذية
A guided stainless entry station that combines automatic boot-sole brushing, touchless hand disinfection and turnstile release for food-production hygiene control.
- Twin Sole-Cleaning Brushes
- Two-Hand Disinfection Sensor
- Controlled Turnstile Release
- Washable Stainless Construction
مقدمة المنتج
The food processing hygiene station creates a single controlled route into sensitive production areas. Personnel walk across two powered sole brushes, place both hands into the disinfection openings and receive turnstile access only after the programmed cycle is completed. Stainless platforms, guide rails, accessible brush channels and a compact control panel support wet-area cleaning and routine chemical dosing checks.
الخصائص الرئيسية
Dual hand-entry openings verify simultaneous touchless disinfection.
The three-arm turnstile releases only after the hygiene sequence is completed.
Open stainless surfaces and removable brush assemblies simplify wash-down.
مخاوف المنتج للعملاء
Personnel can carry soil and microorganisms on footwear and hands into high-care food areas unless entry steps are completed in the correct order.
Staff may bypass separate hand and footwear sanitation points.A forced one-way path links sole cleaning and two-hand disinfection to turnstile release.
Flat sanitizing mats provide limited mechanical soil removal.Two powered cylindrical brushes scrub the full contact area of each sole.
Touch controls can become a secondary contamination surface.Hands are detected inside contactless dosing openings and status is shown by an indicator.
Complex housings retain water and food soil during cleaning.Sloped stainless surfaces, open rails and accessible brush channels improve drainage and wash-down.
تطبيقات نموذجية
Meat and poultry processing entrancesDairy and beverage productionReady-meal and bakery hygiene barriersHigh-care food packaging zones
المعلمات الفنية
Typical configurable construction values for an integrated food-industry hygiene station are listed below.
| المواد الأساسية | 304 stainless-steel frame with polymer sole brushes, dosing components and electromechanical turnstile |
|---|---|
| سمك اللوحة | 40-80 mm platform and pedestal structural sections |
| العرض الفعال | 600-900 mm clear personnel passage width |
| الحد الأقصى الطول | Up to 2400 mm overall station length |
| الصلب يواجه سمك | 1.5-2.5 mm stainless platform and enclosure facing |
| الكثافة الأساسية | 7950-8050 kg/m³ for stainless-steel construction |
| الموصلية الحرارية | 14-16 W / (m · K) للفولاذ المقاوم للصدأ الأوستنيتي |
| إنهاء السطح | Brushed hygienic stainless with blue polymer brushes and black hand-entry liners |
| نوع المشترك | Welded platform with removable brush cartridges, sealed dosing pedestal and bolted turnstile assembly |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Alternative entry or exit orientationBoot-leg brush modulesIntegrated hand washing and dryingAccess-card or personnel-recognition interface
Planning a Food Processing Hygiene Station specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
