English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Оборудование для чистых помещений
Гигиеническая станция для пищевой обработки
A guided stainless entry station that combines automatic boot-sole brushing, touchless hand disinfection and turnstile release for food-production hygiene control.
- Twin Sole-Cleaning Brushes
- Two-Hand Disinfection Sensor
- Controlled Turnstile Release
- Washable Stainless Construction
Введение продукции
The food processing hygiene station creates a single controlled route into sensitive production areas. Personnel walk across two powered sole brushes, place both hands into the disinfection openings and receive turnstile access only after the programmed cycle is completed. Stainless platforms, guide rails, accessible brush channels and a compact control panel support wet-area cleaning and routine chemical dosing checks.
Основные характеристики
Dual hand-entry openings verify simultaneous touchless disinfection.
The three-arm turnstile releases only after the hygiene sequence is completed.
Open stainless surfaces and removable brush assemblies simplify wash-down.
Обеспокоенность клиентов продуктами
Personnel can carry soil and microorganisms on footwear and hands into high-care food areas unless entry steps are completed in the correct order.
Staff may bypass separate hand and footwear sanitation points.A forced one-way path links sole cleaning and two-hand disinfection to turnstile release.
Flat sanitizing mats provide limited mechanical soil removal.Two powered cylindrical brushes scrub the full contact area of each sole.
Touch controls can become a secondary contamination surface.Hands are detected inside contactless dosing openings and status is shown by an indicator.
Complex housings retain water and food soil during cleaning.Sloped stainless surfaces, open rails and accessible brush channels improve drainage and wash-down.
Типичные приложения
Meat and poultry processing entrancesDairy and beverage productionReady-meal and bakery hygiene barriersHigh-care food packaging zones
Технические параметры
Typical configurable construction values for an integrated food-industry hygiene station are listed below.
| Основной материал | 304 stainless-steel frame with polymer sole brushes, dosing components and electromechanical turnstile |
|---|---|
| Толщина панели | 40-80 mm platform and pedestal structural sections |
| эффективная ширина | 600-900 mm clear personnel passage width |
| Максимальная длина | Up to 2400 mm overall station length |
| Толщина линий стали | 1.5-2.5 mm stainless platform and enclosure facing |
| Плотность ядра | 7950-8050 kg/m³ for stainless-steel construction |
| Теплопроводимость | 14-16 W/(m·K) for austenitic stainless steel |
| Поверхностная отделка | Brushed hygienic stainless with blue polymer brushes and black hand-entry liners |
| Объединенный тип | Welded platform with removable brush cartridges, sealed dosing pedestal and bolted turnstile assembly |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Alternative entry or exit orientationBoot-leg brush modulesIntegrated hand washing and dryingAccess-card or personnel-recognition interface
Planning a Food Processing Hygiene Station specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
