English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة الجدار والسقف للغرفة النظيفة
خارجي مستدير زاوية غرف الأبحاث الملف الشخصي
A convex aluminum corner cover that protects projecting cleanroom edges while providing a smooth radiused surface for cleaning and contact safety.
- Convex 50 or 70 mm radius
- Covers vulnerable projecting corners
- Concealed backing and clip-on face
- Smooth powder-coated aluminum finish
مقدمة المنتج
The External Rounded Cleanroom Corner Profile wraps outward-facing wall returns, columns and enclosure corners with a continuous convex radius. Unlike a square angle trim, it removes the sharp exposed edge that is most likely to be struck by carts or personnel. A concealed fixing base supports the curved aluminum cover, producing a resilient, wipeable surface with no prominent screw heads on the room side.
الخصائص الرئيسية
The rounded face deflects glancing contact better than a thin square edge.
Concealed attachment hardware maintains a smooth visible surface.
Extruded aluminum keeps the radius consistent from end to end.
Sealable perimeter edges close the transition to adjacent wall panels.
مخاوف المنتج للعملاء
Projecting corners receive direct contact and are highly visible, so they need protection without introducing bulky, difficult-to-clean guards.
Sharp outside corners can damage garments or cause discomfort when accidentally contacted.The convex radius replaces the narrow edge with a wider, smoother contact surface.
Cart traffic chips coatings at exposed wall returns.A continuous aluminum cover shields the panel edges beneath the corner profile.
Surface-mounted corner guards often leave visible screws and ledges.The curved cover clips over a hidden base, keeping the exposed face uncluttered.
Hand-finished external radii vary along tall wall and column corners.A precision extrusion maintains a repeatable curve over the full profile length.
تطبيقات نموذجية
External corners of cleanroom partitionsColumn and pilaster enclosuresTrolley routes and material airlocksEquipment housing cornersDoor recess external returns
المعلمات الفنية
The external rounded profile is identified by its convex radius. It is not the square 90-degree external angle listed separately in this product range.
| المواد الأساسية | 6063 aluminum external cove face with concealed backing profile |
|---|---|
| سمك اللوحة | N/A — not applicable to an external rounded trim |
| العرض الفعال | 50 or 70 mm external corner radius |
| الحد الأقصى الطول | 3000 mm |
| الصلب يواجه سمك | N/A — not applicable to an aluminum corner profile |
| الكثافة الأساسية | N/A — no insulated core; aluminum alloy density is approximately 2700 kg/m³ |
| الموصلية الحرارية | N/A — no insulated core; aluminum alloy is approximately 200 W/(m·K) |
| إنهاء السطح | White powder-coated or anodized aluminum |
| نوع المشترك | Clip-on convex cover over a concealed external-corner backing section |
| التخصيص | متاح بناءً على التطبيق المقصود وبيئة التشغيل |
الخيارات المتاحة
50 mm convex radius70 mm convex radiusWhite powder-coated finishExternal end and transition pieces
Planning a External Rounded Cleanroom Corner Profile specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
