クリーンルームの壁と天井システム

外部丸いクリーンルームコーナープロファイル

A convex aluminum corner cover that protects projecting cleanroom edges while providing a smooth radiused surface for cleaning and contact safety.

Convex 50 or 70 mm radius
Covers vulnerable projecting corners
Concealed backing and clip-on face
Smooth powder-coated aluminum finish

見積もりリクエスト製品案内

商品紹介

The External Rounded Cleanroom Corner Profile wraps outward-facing wall returns, columns and enclosure corners with a continuous convex radius. Unlike a square angle trim, it removes the sharp exposed edge that is most likely to be struck by carts or personnel. A concealed fixing base supports the curved aluminum cover, producing a resilient, wipeable surface with no prominent screw heads on the room side.

主要な特徴

A broad convex curve reduces the sharpness of exposed external corners.

The rounded face deflects glancing contact better than a thin square edge.

Concealed attachment hardware maintains a smooth visible surface.

Extruded aluminum keeps the radius consistent from end to end.

Sealable perimeter edges close the transition to adjacent wall panels.

お客様の製品に関する懸念事項

Projecting corners receive direct contact and are highly visible, so they need protection without introducing bulky, difficult-to-clean guards.

Sharp outside corners can damage garments or cause discomfort when accidentally contacted.The convex radius replaces the narrow edge with a wider, smoother contact surface.

Cart traffic chips coatings at exposed wall returns.A continuous aluminum cover shields the panel edges beneath the corner profile.

Surface-mounted corner guards often leave visible screws and ledges.The curved cover clips over a hidden base, keeping the exposed face uncluttered.

Hand-finished external radii vary along tall wall and column corners.A precision extrusion maintains a repeatable curve over the full profile length.

典型的な用途

External corners of cleanroom partitionsColumn and pilaster enclosuresTrolley routes and material airlocksEquipment housing cornersDoor recess external returns

技術的なパラメータ

The external rounded profile is identified by its convex radius. It is not the square 90-degree external angle listed separately in this product range.

コア材料	6063 aluminum external cove face with concealed backing profile
パネルの厚さ	N/A — not applicable to an external rounded trim
有効幅	50 or 70 mm external corner radius
最大長さ	3000 mm
鋼鉄の厚さを直面する	N/A — not applicable to an aluminum corner profile
コア密度	N / A— 絶縁コアなし、アルミニウム合金密度は約 2700 kg / m3 です。
熱伝導率	N / A— 絶縁コアなし；アルミニウム合金は約 200 W / （ m · K ）
表面仕上げ	White powder-coated or anodized aluminum
ジョイントタイプ	Clip-on convex cover over a concealed external-corner backing section
カスタマイズ	目的のアプリケーションおよび動作環境に基づいて利用可能

利用可能なオプション

50 mm convex radius70 mm convex radiusWhite powder-coated finishExternal end and transition pieces

Planning a External Rounded Cleanroom Corner Profile specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する