Sistem Dinding dan Langit-langit Cleanroom

Profil Sudut Cleanroom Eksternal Rounded

A convex aluminum corner cover that protects projecting cleanroom edges while providing a smooth radiused surface for cleaning and contact safety.

Convex 50 or 70 mm radius
Covers vulnerable projecting corners
Concealed backing and clip-on face
Smooth powder-coated aluminum finish

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The External Rounded Cleanroom Corner Profile wraps outward-facing wall returns, columns and enclosure corners with a continuous convex radius. Unlike a square angle trim, it removes the sharp exposed edge that is most likely to be struck by carts or personnel. A concealed fixing base supports the curved aluminum cover, producing a resilient, wipeable surface with no prominent screw heads on the room side.

Fitur utama:

A broad convex curve reduces the sharpness of exposed external corners.

The rounded face deflects glancing contact better than a thin square edge.

Concealed attachment hardware maintains a smooth visible surface.

Extruded aluminum keeps the radius consistent from end to end.

Sealable perimeter edges close the transition to adjacent wall panels.

Kekhawatiran produk pelanggan

Projecting corners receive direct contact and are highly visible, so they need protection without introducing bulky, difficult-to-clean guards.

Sharp outside corners can damage garments or cause discomfort when accidentally contacted.The convex radius replaces the narrow edge with a wider, smoother contact surface.

Cart traffic chips coatings at exposed wall returns.A continuous aluminum cover shields the panel edges beneath the corner profile.

Surface-mounted corner guards often leave visible screws and ledges.The curved cover clips over a hidden base, keeping the exposed face uncluttered.

Hand-finished external radii vary along tall wall and column corners.A precision extrusion maintains a repeatable curve over the full profile length.

Aplikasi yang Tipis

External corners of cleanroom partitionsColumn and pilaster enclosuresTrolley routes and material airlocksEquipment housing cornersDoor recess external returns

Parameter teknis

The external rounded profile is identified by its convex radius. It is not the square 90-degree external angle listed separately in this product range.

Bahan inti	6063 aluminum external cove face with concealed backing profile
Ketebalan Panel (Panel Thickness)	N/A — not applicable to an external rounded trim
Efektif lebar	50 or 70 mm external corner radius
Panjang maksimum	3000 mm
Baja menghadap ketebalan	N/A — not applicable to an aluminum corner profile
Kepadatan inti (core density)	N/A — no insulated core; aluminum alloy density is approximately 2700 kg/m³
Konduktivitas Termal (Thermal Conductivity)	N/A — no insulated core; aluminum alloy is approximately 200 W/(m·K)
Permukaan selesai	White powder-coated or anodized aluminum
Jenis Bersama	Clip-on convex cover over a concealed external-corner backing section
Customization (Kustomisasi)	A Tersedia berdasarkan aplikasi dan lingkungan operasi yang dimaksudkan

Pilihan yang tersedia

50 mm convex radius70 mm convex radiusWhite powder-coated finishExternal end and transition pieces

Planning a External Rounded Cleanroom Corner Profile specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami