English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Стенные и потолочные системы для чистых комнат
Внешний округленный угловой профиль чистого помещения
A convex aluminum corner cover that protects projecting cleanroom edges while providing a smooth radiused surface for cleaning and contact safety.
- Convex 50 or 70 mm radius
- Covers vulnerable projecting corners
- Concealed backing and clip-on face
- Smooth powder-coated aluminum finish
Введение продукции
The External Rounded Cleanroom Corner Profile wraps outward-facing wall returns, columns and enclosure corners with a continuous convex radius. Unlike a square angle trim, it removes the sharp exposed edge that is most likely to be struck by carts or personnel. A concealed fixing base supports the curved aluminum cover, producing a resilient, wipeable surface with no prominent screw heads on the room side.
Основные характеристики
The rounded face deflects glancing contact better than a thin square edge.
Concealed attachment hardware maintains a smooth visible surface.
Extruded aluminum keeps the radius consistent from end to end.
Sealable perimeter edges close the transition to adjacent wall panels.
Обеспокоенность клиентов продуктами
Projecting corners receive direct contact and are highly visible, so they need protection without introducing bulky, difficult-to-clean guards.
Sharp outside corners can damage garments or cause discomfort when accidentally contacted.The convex radius replaces the narrow edge with a wider, smoother contact surface.
Cart traffic chips coatings at exposed wall returns.A continuous aluminum cover shields the panel edges beneath the corner profile.
Surface-mounted corner guards often leave visible screws and ledges.The curved cover clips over a hidden base, keeping the exposed face uncluttered.
Hand-finished external radii vary along tall wall and column corners.A precision extrusion maintains a repeatable curve over the full profile length.
Типичные приложения
External corners of cleanroom partitionsColumn and pilaster enclosuresTrolley routes and material airlocksEquipment housing cornersDoor recess external returns
Технические параметры
The external rounded profile is identified by its convex radius. It is not the square 90-degree external angle listed separately in this product range.
| Основной материал | 6063 aluminum external cove face with concealed backing profile |
|---|---|
| Толщина панели | N/A — not applicable to an external rounded trim |
| эффективная ширина | 50 or 70 mm external corner radius |
| Максимальная длина | 3000 mm |
| Толщина линий стали | N/A — not applicable to an aluminum corner profile |
| Плотность ядра | N/A — no insulated core; aluminum alloy density is approximately 2700 kg/m³ |
| Теплопроводимость | N/A — no insulated core; aluminum alloy is approximately 200 W/(m·K) |
| Поверхностная отделка | White powder-coated or anodized aluminum |
| Объединенный тип | Clip-on convex cover over a concealed external-corner backing section |
| Customization | Доступно в зависимости от предполагаемого приложения и операционной среды |
Доступные варианты
50 mm convex radius70 mm convex radiusWhite powder-coated finishExternal end and transition pieces
Planning a External Rounded Cleanroom Corner Profile specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
