Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Sistemas de pared y techo de sala limpia
Perfil de esquina de sala limpia redondeada externa
A convex aluminum corner cover that protects projecting cleanroom edges while providing a smooth radiused surface for cleaning and contact safety.
- Convex 50 or 70 mm radius
- Covers vulnerable projecting corners
- Concealed backing and clip-on face
- Smooth powder-coated aluminum finish
Introducción del producto
The External Rounded Cleanroom Corner Profile wraps outward-facing wall returns, columns and enclosure corners with a continuous convex radius. Unlike a square angle trim, it removes the sharp exposed edge that is most likely to be struck by carts or personnel. A concealed fixing base supports the curved aluminum cover, producing a resilient, wipeable surface with no prominent screw heads on the room side.
Características clave
The rounded face deflects glancing contact better than a thin square edge.
Concealed attachment hardware maintains a smooth visible surface.
Extruded aluminum keeps the radius consistent from end to end.
Sealable perimeter edges close the transition to adjacent wall panels.
Preocupaciones del producto del cliente
Projecting corners receive direct contact and are highly visible, so they need protection without introducing bulky, difficult-to-clean guards.
Sharp outside corners can damage garments or cause discomfort when accidentally contacted.The convex radius replaces the narrow edge with a wider, smoother contact surface.
Cart traffic chips coatings at exposed wall returns.A continuous aluminum cover shields the panel edges beneath the corner profile.
Surface-mounted corner guards often leave visible screws and ledges.The curved cover clips over a hidden base, keeping the exposed face uncluttered.
Hand-finished external radii vary along tall wall and column corners.A precision extrusion maintains a repeatable curve over the full profile length.
Aplicaciones típicas
External corners of cleanroom partitionsColumn and pilaster enclosuresTrolley routes and material airlocksEquipment housing cornersDoor recess external returns
Parámetros técnicos
The external rounded profile is identified by its convex radius. It is not the square 90-degree external angle listed separately in this product range.
| Materiales Core | 6063 aluminum external cove face with concealed backing profile |
|---|---|
| Panel de espesor | N/A — not applicable to an external rounded trim |
| Ancho efectivo | 50 or 70 mm external corner radius |
| Longitud máxima | 3000 mm |
| Acero frente a espesor | N/A — not applicable to an aluminum corner profile |
| Densidad Core | N/A — no insulated core; aluminum alloy density is approximately 2700 kg/m³ |
| Conductividad térmica | N/A — no insulated core; aluminum alloy is approximately 200 W/(m·K) |
| Superficie acabada | White powder-coated or anodized aluminum |
| Tipo conjunto | Clip-on convex cover over a concealed external-corner backing section |
| Customization | Disponible según la aplicación prevista y el entorno operativo |
Opciones disponibles
50 mm convex radius70 mm convex radiusWhite powder-coated finishExternal end and transition pieces
Planning a External Rounded Cleanroom Corner Profile specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
