Dinding bilik bersih dan sistem siling

Profil sudut bilik bersih bulat luaran

A convex aluminum corner cover that protects projecting cleanroom edges while providing a smooth radiused surface for cleaning and contact safety.

Convex 50 or 70 mm radius
Covers vulnerable projecting corners
Concealed backing and clip-on face
Smooth powder-coated aluminum finish

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The External Rounded Cleanroom Corner Profile wraps outward-facing wall returns, columns and enclosure corners with a continuous convex radius. Unlike a square angle trim, it removes the sharp exposed edge that is most likely to be struck by carts or personnel. A concealed fixing base supports the curved aluminum cover, producing a resilient, wipeable surface with no prominent screw heads on the room side.

Ciri-ciri Utama

A broad convex curve reduces the sharpness of exposed external corners.

The rounded face deflects glancing contact better than a thin square edge.

Concealed attachment hardware maintains a smooth visible surface.

Extruded aluminum keeps the radius consistent from end to end.

Sealable perimeter edges close the transition to adjacent wall panels.

Kebimbangan Produk Pelanggan

Projecting corners receive direct contact and are highly visible, so they need protection without introducing bulky, difficult-to-clean guards.

Sharp outside corners can damage garments or cause discomfort when accidentally contacted.The convex radius replaces the narrow edge with a wider, smoother contact surface.

Cart traffic chips coatings at exposed wall returns.A continuous aluminum cover shields the panel edges beneath the corner profile.

Surface-mounted corner guards often leave visible screws and ledges.The curved cover clips over a hidden base, keeping the exposed face uncluttered.

Hand-finished external radii vary along tall wall and column corners.A precision extrusion maintains a repeatable curve over the full profile length.

Permohonan yang biasa

External corners of cleanroom partitionsColumn and pilaster enclosuresTrolley routes and material airlocksEquipment housing cornersDoor recess external returns

Parameter teknikal

The external rounded profile is identified by its convex radius. It is not the square 90-degree external angle listed separately in this product range.

Bahan Teras	6063 aluminum external cove face with concealed backing profile
Ketebalan Panel	N/A — not applicable to an external rounded trim
Lebar berkesan	50 or 70 mm external corner radius
Panjang maksimum	3000 mm
Keluli Menghadapi Ketebalan	N/A — not applicable to an aluminum corner profile
Ketumpatan teras	N/A — no insulated core; aluminum alloy density is approximately 2700 kg/m³
Kekonduksian Terma	N/A — no insulated core; aluminum alloy is approximately 200 W/(m·K)
Kemasan permukaan	White powder-coated or anodized aluminum
Jenis Bersatu	Clip-on convex cover over a concealed external-corner backing section
Penyesuaian	Terdapat berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi

Pilihan yang boleh didapati

50 mm convex radius70 mm convex radiusWhite powder-coated finishExternal end and transition pieces

Planning a External Rounded Cleanroom Corner Profile specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami