클린룸 벽 및 천장 시스템

외부 둥근 클린룸 구석 프로파일

A convex aluminum corner cover that protects projecting cleanroom edges while providing a smooth radiused surface for cleaning and contact safety.

Convex 50 or 70 mm radius
Covers vulnerable projecting corners
Concealed backing and clip-on face
Smooth powder-coated aluminum finish

견적 요청 제품 찾아보기

상품 소개

The External Rounded Cleanroom Corner Profile wraps outward-facing wall returns, columns and enclosure corners with a continuous convex radius. Unlike a square angle trim, it removes the sharp exposed edge that is most likely to be struck by carts or personnel. A concealed fixing base supports the curved aluminum cover, producing a resilient, wipeable surface with no prominent screw heads on the room side.

주요 기능

A broad convex curve reduces the sharpness of exposed external corners.

The rounded face deflects glancing contact better than a thin square edge.

Concealed attachment hardware maintains a smooth visible surface.

Extruded aluminum keeps the radius consistent from end to end.

Sealable perimeter edges close the transition to adjacent wall panels.

고객 제품 관심사

Projecting corners receive direct contact and are highly visible, so they need protection without introducing bulky, difficult-to-clean guards.

Sharp outside corners can damage garments or cause discomfort when accidentally contacted.The convex radius replaces the narrow edge with a wider, smoother contact surface.

Cart traffic chips coatings at exposed wall returns.A continuous aluminum cover shields the panel edges beneath the corner profile.

Surface-mounted corner guards often leave visible screws and ledges.The curved cover clips over a hidden base, keeping the exposed face uncluttered.

Hand-finished external radii vary along tall wall and column corners.A precision extrusion maintains a repeatable curve over the full profile length.

일반적인 응용 프로그램

External corners of cleanroom partitionsColumn and pilaster enclosuresTrolley routes and material airlocksEquipment housing cornersDoor recess external returns

기술 매개변수

The external rounded profile is identified by its convex radius. It is not the square 90-degree external angle listed separately in this product range.

핵심 재료	6063 aluminum external cove face with concealed backing profile
패널 두께	N/A — not applicable to an external rounded trim
유효 폭	50 or 70 mm external corner radius
최대 길이	3000 mm
강철 면면 두께	N/A — not applicable to an aluminum corner profile
코어 밀도	N / A - 단열 코어 없음; 알루미늄 합금 밀도는 약 2700 kg / m 3 입니다.
열전도도 (Thermal Conductivity)	N / A - 단열 코어 없음; 알루미늄 합금 약 200 W / (m · K)
표면 마무리	White powder-coated or anodized aluminum
접합 유형	Clip-on convex cover over a concealed external-corner backing section
사용자 정의	사용 대상 어플리케이션 및 운영 환경에 따라 사용 가능

사용 가능한 옵션

50 mm convex radius70 mm convex radiusWhite powder-coated finishExternal end and transition pieces

Planning a External Rounded Cleanroom Corner Profile specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.