English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات الغرف النظيفة المحددة للصناعة
غرفة نظيفة مقعد رطب
A ventilated polypropylene wet-processing station integrating chemical baths, rinsing utilities and service access for controlled semiconductor and precision cleaning workflows.
- Chemical-Resistant Construction
- Controlled Rear Exhaust
- Modular Process Baths
- Serviceable Utility Cabinet
مقدمة المنتج
The cleanroom wet bench provides an enclosed, exhausted work zone for wafer cleaning, etching and rinsing. Welded polypropylene surfaces resist common process chemicals, while rear baffles draw vapors away from the operator. Baths, cascade rinse modules, DI-water fittings, spray tools and controls can be arranged around the required process sequence, with lower access doors separating utilities from the working deck.
الخصائص الرئيسية
Rear and upper exhaust paths capture vapors across the process zone.
Modular bath openings accommodate heated process tanks, overflow rinses and sinks.
Accessible lower compartments simplify inspection of drains, valves and utility connections.
مخاوف المنتج للعملاء
Wet processes require chemical compatibility, reliable vapor capture and clean utility routing without compromising operator access.
Acid and alkali exposure rapidly degrades unsuitable bench materials.Chemical-compatible polypropylene or optional PVDF contact surfaces are selected for the process chemistry.
Fumes escape when exhaust distribution is uneven.Adjustable rear baffles and top exhaust connections draw air uniformly across the working zone.
Mixed rinse and process steps create inefficient handling paths.Baths, faucets and spray tools are arranged in the actual operating sequence.
Hidden leaks and blocked drains are difficult to service.Front-access utility compartments provide direct access to valves, unions and drain lines.
تطبيقات نموذجية
Semiconductor wafer cleaning and etchingPhotovoltaic and substrate processingPrecision parts chemical cleaningResearch cleanroom wet chemistry
المعلمات الفنية
Typical construction values for a modular polypropylene cleanroom wet bench are listed below.
| المواد الأساسية | Welded chemical-resistant polypropylene with optional PVDF process-contact components |
|---|---|
| سمك اللوحة | 8-20 mm polypropylene panels |
| العرض الفعال | 1200-3000 mm work-zone width |
| الحد الأقصى الطول | Up to 6000 mm modular bench length |
| الصلب يواجه سمك | 1.0-1.5 mm for optional stainless utility reinforcement |
| الكثافة الأساسية | 900-920 kg/m³ for polypropylene construction sheet |
| الموصلية الحرارية | 0.20-0.24 W/(m·K) for polypropylene construction |
| إنهاء السطح | Smooth natural-white welded polypropylene with transparent amber safety sash |
| نوع المشترك | Hot-gas welded enclosure seams with gasketed access panels, union utility fittings and flanged exhaust connections |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Open or enclosed sash configurationHEPA-supplied laminar airflow hoodQuartz, PP or PVDF process bathsPLC controls and automated chemical handling
Planning a Cleanroom Wet Bench specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
