English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات الصرف الصحي والنظافة والسلامة في الغرف النظيفة
غرفة نظيفة إضاءة الطوارئ
A sealed LED emergency luminaire that provides backup illumination along controlled-environment escape paths.
- Battery-Backed LED Output
- Sealed Low-Profile Enclosure
- Maintained or Non-Maintained Mode
- Automatic Self-Test Option
مقدمة المنتج
The cleanroom emergency luminaire combines LED optics, charging electronics and a rechargeable battery in a gasketed low-profile housing. It monitors the normal supply and changes to emergency operation automatically after a power failure. Recessed, surface and remote-head configurations support clean ceilings and walls, while self-test electronics can reduce manual inspection effort.
الخصائص الرئيسية
A sealed smooth housing suits wipe-down and controlled spaces.
Maintained and non-maintained operating modes support different egress plans.
Optional automatic testing reports lamp, battery and charging faults.
مخاوف المنتج للعملاء
Emergency illumination must remain available during power loss without compromising the cleanable ceiling or requiring frequent intrusive testing.
An open battery fitting creates ceiling gaps and dust ledges.The lamp, electronics and battery are enclosed behind a gasketed smooth face.
Battery degradation is discovered only during an outage.Self-test control can perform scheduled functional and duration checks.
A bright normal-mode fixture may conflict with room lighting design.Maintained, non-maintained and remote-head options separate emergency function from general lighting.
Battery access can disturb the ceiling.A removable front or service-side compartment permits component replacement without removing the mounting frame.
تطبيقات نموذجية
Cleanroom escape routesAirlock and gowning areasLaboratory corridorsControlled utility spaces
المعلمات الفنية
Typical physical construction values are listed below; emergency output and duration are selected from the egress-lighting calculation.
| المواد الأساسية | Powder-coated steel or engineering-polymer housing with LED optics and rechargeable battery |
|---|---|
| سمك اللوحة | 1.0-1.5 mm metal housing or 2.0-3.0 mm polymer body |
| العرض الفعال | 180-450 mm |
| الحد الأقصى الطول | Up to 600 mm fixture length |
| الصلب يواجه سمك | 1.0-1.5 mm optional steel face and backplate |
| الكثافة الأساسية | 7850 kg/m³ for steel enclosure parts |
| الموصلية الحرارية | 45-60 W/(m·K) for steel enclosure components |
| إنهاء السطح | Smooth white cleanroom-compatible coating with clear optical lens |
| نوع المشترك | Gasketed face on recessed or surface mounting backplate |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Maintained or non-maintained modeSelf-test electronicsRecessed or surface mountRemote LED heads
Planning a Cleanroom Emergency Lighting specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
