Complete sealed cleanroom emergency luminaire in three-quarter view

클린룸 배수, 위생 및 안전 장비

클린룸 비상 조명

A sealed LED emergency luminaire that provides backup illumination along controlled-environment escape paths.

Battery-Backed LED Output
Sealed Low-Profile Enclosure
Maintained or Non-Maintained Mode
Automatic Self-Test Option

견적 요청 제품 찾아보기

상품 소개

The cleanroom emergency luminaire combines LED optics, charging electronics and a rechargeable battery in a gasketed low-profile housing. It monitors the normal supply and changes to emergency operation automatically after a power failure. Recessed, surface and remote-head configurations support clean ceilings and walls, while self-test electronics can reduce manual inspection effort.

주요 기능

Efficient LEDs extend backup duration from a compact battery.

A sealed smooth housing suits wipe-down and controlled spaces.

Maintained and non-maintained operating modes support different egress plans.

Optional automatic testing reports lamp, battery and charging faults.

고객 제품 관심사

Emergency illumination must remain available during power loss without compromising the cleanable ceiling or requiring frequent intrusive testing.

An open battery fitting creates ceiling gaps and dust ledges.The lamp, electronics and battery are enclosed behind a gasketed smooth face.

Battery degradation is discovered only during an outage.Self-test control can perform scheduled functional and duration checks.

A bright normal-mode fixture may conflict with room lighting design.Maintained, non-maintained and remote-head options separate emergency function from general lighting.

Battery access can disturb the ceiling.A removable front or service-side compartment permits component replacement without removing the mounting frame.

일반적인 응용 프로그램

Cleanroom escape routesAirlock and gowning areasLaboratory corridorsControlled utility spaces

기술 매개변수

Typical physical construction values are listed below; emergency output and duration are selected from the egress-lighting calculation.

핵심 재료	Powder-coated steel or engineering-polymer housing with LED optics and rechargeable battery
패널 두께	1. 0 - 1. 5 mm 금속 하우징 또는 2. 0 - 3. 0 mm 폴리머 본체
유효 폭	180-450 mm
최대 길이	Up to 600 mm fixture length
강철 면면 두께	1.0-1.5 mm optional steel face and backplate
코어 밀도	7850 kg / m 3 강철 엔클로저 부품
열전도도 (Thermal Conductivity)	45 - 60 W / (m · K) 강철 엔클로저 구성 요소
표면 마무리	Smooth white cleanroom-compatible coating with clear optical lens
접합 유형	Gasketed face on recessed or surface mounting backplate
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Maintained or non-maintained modeSelf-test electronicsRecessed or surface mountRemote LED heads

Planning a Cleanroom Emergency Lighting specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.