Complete sealed cleanroom emergency luminaire in three-quarter view

クリーンルーム排水 · 衛生 · 安全設備

クリーンルーム緊急照明

A sealed LED emergency luminaire that provides backup illumination along controlled-environment escape paths.

Battery-Backed LED Output
Sealed Low-Profile Enclosure
Maintained or Non-Maintained Mode
Automatic Self-Test Option

商品紹介

The cleanroom emergency luminaire combines LED optics, charging electronics and a rechargeable battery in a gasketed low-profile housing. It monitors the normal supply and changes to emergency operation automatically after a power failure. Recessed, surface and remote-head configurations support clean ceilings and walls, while self-test electronics can reduce manual inspection effort.

主要な特徴

Efficient LEDs extend backup duration from a compact battery.

A sealed smooth housing suits wipe-down and controlled spaces.

Maintained and non-maintained operating modes support different egress plans.

Optional automatic testing reports lamp, battery and charging faults.

お客様の製品に関する懸念事項

Emergency illumination must remain available during power loss without compromising the cleanable ceiling or requiring frequent intrusive testing.

An open battery fitting creates ceiling gaps and dust ledges.The lamp, electronics and battery are enclosed behind a gasketed smooth face.

Battery degradation is discovered only during an outage.Self-test control can perform scheduled functional and duration checks.

A bright normal-mode fixture may conflict with room lighting design.Maintained, non-maintained and remote-head options separate emergency function from general lighting.

Battery access can disturb the ceiling.A removable front or service-side compartment permits component replacement without removing the mounting frame.

典型的な用途

Cleanroom escape routesAirlock and gowning areas研究室の廊下Controlled utility spaces

技術的なパラメータ

Typical physical construction values are listed below; emergency output and duration are selected from the egress-lighting calculation.

コア材料	Powder-coated steel or engineering-polymer housing with LED optics and rechargeable battery
パネルの厚さ	1.0-1.5 mm metal housing or 2.0-3.0 mm polymer body
有効幅	180-450 mm
最大長さ	Up to 600 mm fixture length
鋼鉄の厚さを直面する	1.0-1.5 mm optional steel face and backplate
コア密度	7850 kg/m³ for steel enclosure parts
熱伝導率	45-60 W/(m·K) for steel enclosure components
表面仕上げ	Smooth white cleanroom-compatible coating with clear optical lens
ジョイントタイプ	Gasketed face on recessed or surface mounting backplate
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Maintained or non-maintained modeSelf-test electronicsRecessed or surface mountRemote LED heads

Planning a Cleanroom Emergency Lighting specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する