Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Drenaje de sala limpia, equipos de higiene y seguridad
Iluminación de emergencia de sala limpia por
A sealed LED emergency luminaire that provides backup illumination along controlled-environment escape paths.
- Battery-Backed LED Output
- Sealed Low-Profile Enclosure
- Maintained or Non-Maintained Mode
- Automatic Self-Test Option
Introducción del producto
The cleanroom emergency luminaire combines LED optics, charging electronics and a rechargeable battery in a gasketed low-profile housing. It monitors the normal supply and changes to emergency operation automatically after a power failure. Recessed, surface and remote-head configurations support clean ceilings and walls, while self-test electronics can reduce manual inspection effort.
Características clave
A sealed smooth housing suits wipe-down and controlled spaces.
Maintained and non-maintained operating modes support different egress plans.
Optional automatic testing reports lamp, battery and charging faults.
Preocupaciones del producto del cliente
Emergency illumination must remain available during power loss without compromising the cleanable ceiling or requiring frequent intrusive testing.
An open battery fitting creates ceiling gaps and dust ledges.The lamp, electronics and battery are enclosed behind a gasketed smooth face.
Battery degradation is discovered only during an outage.Self-test control can perform scheduled functional and duration checks.
A bright normal-mode fixture may conflict with room lighting design.Maintained, non-maintained and remote-head options separate emergency function from general lighting.
Battery access can disturb the ceiling.A removable front or service-side compartment permits component replacement without removing the mounting frame.
Aplicaciones típicas
Cleanroom escape routesAirlock and gowning areasLaboratory corridorsControlled utility spaces
Parámetros técnicos
Typical physical construction values are listed below; emergency output and duration are selected from the egress-lighting calculation.
| Materiales Core | Powder-coated steel or engineering-polymer housing with LED optics and rechargeable battery |
|---|---|
| Panel de espesor | 1.0-1.5 mm metal housing or 2.0-3.0 mm polymer body |
| Ancho efectivo | 180-450 mm |
| Longitud máxima | Up to 600 mm fixture length |
| Acero frente a espesor | 1.0-1.5 mm optional steel face and backplate |
| Densidad Core | 7850 kg/m³ for steel enclosure parts |
| Conductividad térmica | 45-60 W/(m·K) for steel enclosure components |
| Superficie acabada | Smooth white cleanroom-compatible coating with clear optical lens |
| Tipo conjunto | Gasketed face on recessed or surface mounting backplate |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Maintained or non-maintained modeSelf-test electronicsRecessed or surface mountRemote LED heads
Planning a Cleanroom Emergency Lighting specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
