İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Drenajı, Hijyen ve Güvenlik Ekipmanları
Temiz Oda Acil Aydınlatma
A sealed LED emergency luminaire that provides backup illumination along controlled-environment escape paths.
- Battery-Backed LED Output
- Sealed Low-Profile Enclosure
- Maintained or Non-Maintained Mode
- Automatic Self-Test Option
Ürün tanıtımı
The cleanroom emergency luminaire combines LED optics, charging electronics and a rechargeable battery in a gasketed low-profile housing. It monitors the normal supply and changes to emergency operation automatically after a power failure. Recessed, surface and remote-head configurations support clean ceilings and walls, while self-test electronics can reduce manual inspection effort.
Ana Özellikler
A sealed smooth housing suits wipe-down and controlled spaces.
Maintained and non-maintained operating modes support different egress plans.
Optional automatic testing reports lamp, battery and charging faults.
Müşteri Ürün Sorunları
Emergency illumination must remain available during power loss without compromising the cleanable ceiling or requiring frequent intrusive testing.
An open battery fitting creates ceiling gaps and dust ledges.The lamp, electronics and battery are enclosed behind a gasketed smooth face.
Battery degradation is discovered only during an outage.Self-test control can perform scheduled functional and duration checks.
A bright normal-mode fixture may conflict with room lighting design.Maintained, non-maintained and remote-head options separate emergency function from general lighting.
Battery access can disturb the ceiling.A removable front or service-side compartment permits component replacement without removing the mounting frame.
Tipik uygulamalar
Cleanroom escape routesAirlock and gowning areasLaboratory corridorsControlled utility spaces
Teknik parametreler
Typical physical construction values are listed below; emergency output and duration are selected from the egress-lighting calculation.
| Temel malzemeler | Powder-coated steel or engineering-polymer housing with LED optics and rechargeable battery |
|---|---|
| Panel kalınlığı | 1.0-1.5 mm metal housing or 2.0-3.0 mm polymer body |
| Effective Width (Etkili Genişlik) | 180-450 mm |
| Maksimum uzunluk | Up to 600 mm fixture length |
| Çelik yüz yüze kalınlığı | 1.0-1.5 mm optional steel face and backplate |
| Core Density (Çekirdek Yoğunluğu) | 7850 kg/m³ for steel enclosure parts |
| Termal İletkenlik | 45-60 W/(m·K) for steel enclosure components |
| Yüzey bitirme | Smooth white cleanroom-compatible coating with clear optical lens |
| Ortak tip | Gasketed face on recessed or surface mounting backplate |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Maintained or non-maintained modeSelf-test electronicsRecessed or surface mountRemote LED heads
Planning a Cleanroom Emergency Lighting specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
