Complete sealed cleanroom emergency luminaire in three-quarter view

Дренажное оборудование, оборудование для гигиены и безопасности в чистых помещениях

Аварийное освещение в чистых помещениях

A sealed LED emergency luminaire that provides backup illumination along controlled-environment escape paths.

Battery-Backed LED Output
Sealed Low-Profile Enclosure
Maintained or Non-Maintained Mode
Automatic Self-Test Option

Введение продукции

The cleanroom emergency luminaire combines LED optics, charging electronics and a rechargeable battery in a gasketed low-profile housing. It monitors the normal supply and changes to emergency operation automatically after a power failure. Recessed, surface and remote-head configurations support clean ceilings and walls, while self-test electronics can reduce manual inspection effort.

Основные характеристики

Efficient LEDs extend backup duration from a compact battery.

A sealed smooth housing suits wipe-down and controlled spaces.

Maintained and non-maintained operating modes support different egress plans.

Optional automatic testing reports lamp, battery and charging faults.

Обеспокоенность клиентов продуктами

Emergency illumination must remain available during power loss without compromising the cleanable ceiling or requiring frequent intrusive testing.

An open battery fitting creates ceiling gaps and dust ledges.The lamp, electronics and battery are enclosed behind a gasketed smooth face.

Battery degradation is discovered only during an outage.Self-test control can perform scheduled functional and duration checks.

A bright normal-mode fixture may conflict with room lighting design.Maintained, non-maintained and remote-head options separate emergency function from general lighting.

Battery access can disturb the ceiling.A removable front or service-side compartment permits component replacement without removing the mounting frame.

Типичные приложения

Cleanroom escape routesAirlock and gowning areasLaboratory corridorsControlled utility spaces

Технические параметры

Typical physical construction values are listed below; emergency output and duration are selected from the egress-lighting calculation.

Основной материал	Powder-coated steel or engineering-polymer housing with LED optics and rechargeable battery
Толщина панели	1.0-1.5 mm metal housing or 2.0-3.0 mm polymer body
эффективная ширина	180-450 mm
Максимальная длина	Up to 600 mm fixture length
Толщина линий стали	1.0-1.5 mm optional steel face and backplate
Плотность ядра	7850 kg/m³ for steel enclosure parts
Теплопроводимость	45-60 W/(m·K) for steel enclosure components
Поверхностная отделка	Smooth white cleanroom-compatible coating with clear optical lens
Объединенный тип	Gasketed face on recessed or surface mounting backplate
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Maintained or non-maintained modeSelf-test electronicsRecessed or surface mountRemote LED heads

Planning a Cleanroom Emergency Lighting specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой