Complete sealed cleanroom emergency luminaire in three-quarter view

Drainage de salle blanche, équipement d'hygiène et de sécurité

Z Éclairage d'urgence Cleanroom par

A sealed LED emergency luminaire that provides backup illumination along controlled-environment escape paths.

Battery-Backed LED Output
Sealed Low-Profile Enclosure
Maintained or Non-Maintained Mode
Automatic Self-Test Option

Introduction de produit

The cleanroom emergency luminaire combines LED optics, charging electronics and a rechargeable battery in a gasketed low-profile housing. It monitors the normal supply and changes to emergency operation automatically after a power failure. Recessed, surface and remote-head configurations support clean ceilings and walls, while self-test electronics can reduce manual inspection effort.

Key Features

Efficient LEDs extend backup duration from a compact battery.

A sealed smooth housing suits wipe-down and controlled spaces.

Maintained and non-maintained operating modes support different egress plans.

Optional automatic testing reports lamp, battery and charging faults.

Préoccupations du client produit

Emergency illumination must remain available during power loss without compromising the cleanable ceiling or requiring frequent intrusive testing.

An open battery fitting creates ceiling gaps and dust ledges.The lamp, electronics and battery are enclosed behind a gasketed smooth face.

Battery degradation is discovered only during an outage.Self-test control can perform scheduled functional and duration checks.

A bright normal-mode fixture may conflict with room lighting design.Maintained, non-maintained and remote-head options separate emergency function from general lighting.

Battery access can disturb the ceiling.A removable front or service-side compartment permits component replacement without removing the mounting frame.

Les applications typiques

Cleanroom escape routesAirlock and gowning areasCouloirs de laboratoire parControlled utility spaces

Paramètres techniques

Typical physical construction values are listed below; emergency output and duration are selected from the egress-lighting calculation.

Matériaux de base	Powder-coated steel or engineering-polymer housing with LED optics and rechargeable battery
Panneau épaisseur	1.0-1.5 mm metal housing or 2.0-3.0 mm polymer body
Largeur effective	180-450 mm
Longueur maximale	Up to 600 mm fixture length
Acier face épaisseur	1.0-1.5 mm optional steel face and backplate
Densité Core	7850 kg/m³ for steel enclosure parts
Conductivité thermique	45-60 W/(m·K) for steel enclosure components
surface finie	Smooth white cleanroom-compatible coating with clear optical lens
Type joint	Gasketed face on recessed or surface mounting backplate
Customisation	Disponible en fonction de l'application prévue et de l'environnement d'exploitation.

Options disponibles

Maintained or non-maintained modeSelf-test electronicsRecessed or surface mountRemote LED heads

Planning a Cleanroom Emergency Lighting specification?

Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.

Parlez à notre équipe