Pembekal Satu Henti Anda untuk Peralatan Bilik Bersih dan Kemudahan AseptikSokongan Projek Antarabangsa
Open mobile navigationClose mobile navigation
Peralatan Saliran Bilik Bersih, Kebersihan dan Keselamatan

Lampu kecemasan bilik bersih

A sealed LED emergency luminaire that provides backup illumination along controlled-environment escape paths.
  • Battery-Backed LED Output
  • Sealed Low-Profile Enclosure
  • Maintained or Non-Maintained Mode
  • Automatic Self-Test Option
Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The cleanroom emergency luminaire combines LED optics, charging electronics and a rechargeable battery in a gasketed low-profile housing. It monitors the normal supply and changes to emergency operation automatically after a power failure. Recessed, surface and remote-head configurations support clean ceilings and walls, while self-test electronics can reduce manual inspection effort.

Ciri-ciri Utama

Efficient LEDs extend backup duration from a compact battery.

A sealed smooth housing suits wipe-down and controlled spaces.

Maintained and non-maintained operating modes support different egress plans.

Optional automatic testing reports lamp, battery and charging faults.

Kebimbangan Produk Pelanggan

Emergency illumination must remain available during power loss without compromising the cleanable ceiling or requiring frequent intrusive testing.

An open battery fitting creates ceiling gaps and dust ledges.The lamp, electronics and battery are enclosed behind a gasketed smooth face.
Battery degradation is discovered only during an outage.Self-test control can perform scheduled functional and duration checks.
A bright normal-mode fixture may conflict with room lighting design.Maintained, non-maintained and remote-head options separate emergency function from general lighting.
Battery access can disturb the ceiling.A removable front or service-side compartment permits component replacement without removing the mounting frame.

Permohonan yang biasa

Cleanroom escape routesAirlock and gowning areasKoridor MakmalControlled utility spaces

Parameter teknikal

Typical physical construction values are listed below; emergency output and duration are selected from the egress-lighting calculation.

Bahan TerasPowder-coated steel or engineering-polymer housing with LED optics and rechargeable battery
Ketebalan Panel1.0-1.5 mm metal housing or 2.0-3.0 mm polymer body
Lebar berkesan180-450 mm
Panjang maksimumUp to 600 mm fixture length
Keluli Menghadapi Ketebalan1.0-1.5 mm optional steel face and backplate
Ketumpatan teras7850 kg/m³ for steel enclosure parts
Kekonduksian Terma45-60 W/(m·K) for steel enclosure components
Kemasan permukaanSmooth white cleanroom-compatible coating with clear optical lens
Jenis BersatuGasketed face on recessed or surface mounting backplate
PenyesuaianBoleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Maintained or non-maintained modeSelf-test electronicsRecessed or surface mountRemote LED heads

Planning a Cleanroom Emergency Lighting specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami
Email Kami WhatsApp WeChat

Laman Utama

Produk

Berita

Tentang Kami

Hubungi Kami